You should have your outdated outlet changed bya qualified, licensed electrician. Do notfile the wide blade on the plug, or use an adapter to make the plug fit into your outlet. This defeats the safety feature and could expose you to electric shock. Battery Operation 1 .) Remove the battery compartment door on the bottom of the cabinet by pressing on the " oPEN v " tabs in the direction of the arrows, and lift the door up. ,:\ t I),: '' +'/ 2.) lnsert B pcs "G" size batteries into the battery co

— Create playlists of your favorite songs. 1. Press and hold the Prog. Button when CD is not in play. 2. Press the »|, \4i or + 10 buttons to locate the tracks you want in your playlist. 3. Press the Prog. Button to select each track. 4. Repeat Steps 2 and 3 until you have finished selecting tracks. 5. Press Play/Pause to begin playing the playlist of tracks. 6. Press Stopflto stop playing the playlist and to clear it from memory. + 10 — Skip 10 tracks ahead. Mode 1 Repeat Current Song

100% compatibility cannot be guaranteed. This is not an indication of any problems with your player. 1.) Slide the CD door OPEN switch to the right to unlock and open the CD door. 2.) Place your CD on the center spindle with the printed label side facing up. Press downward on the disc near the center hole until the disc is fully seated on the spindle. 3.) Close the CD door and connect the headphones to the headphone jack (green color) by pushing the headphone plug the into headphone jack until a

■ — key. 2.) Place a pre-recorded cassette tape with the open edge facing up and the full reel on the right side. 3.) Move the FUNCTION selector to the TAPE-POWER OFF position. 4.) Press the cassette PLAY -4 key to begin playback. 5.) Set the VOLUME control as desired. 6.) To advance the tape rapidly press the F.FWD <4 key. To stop the tape before it ends, press the STOP/EJ. ■ — key. 7.) To rewind the tape rapidly press the REW ►► key. To stop the tape before it ends press the STOP/EJ. ■ ±

NOTE: When a tab is broken out, the record button cannot be depressed. Tab Break out the tab Cover with tape CASSETTE TAPE RECOMMENDATIONS Standard tape lengths have 15 (C-30), 30 (C-60) and 45 (C-90) minutes of recording time on each side. Longer length tapes of 60 (C-120) minutes of recording time on each side are not recommended. Use only high quality tapes. If a problem develops, check the unit first with another cassette to determine if the problem is with the cassette, and not with the uni

2.) Open the cassette compartment and insert a blank cassette tape. 3.) Press the FUNCTION button to select the CD mode. 4.) Press the cassette Record key. The SYNC indicator appears in the display. SYNC The cassette recorder and the CDplayer will start simutaneously and all of the material on your CD will be recorder directly onto the blank cassette. Note: If a CD is already playing and you press the cassette Record key, ,, the CD player will back up to the beginning of the track being played a

11 HD7090_ib072902.p65 11 29/7/2002, 18:33 INTRO SCAN This feature plays only the first 10 seconds of each track on the disc. 1.) At stop mode press the MODE button 3 times. The “INT”indicator appears in the display. 2.) Press PLAY/PAUSE button to begin playback. 3.) The player begins track 1 and plays just the first 10 seconds of each track on the disc. When the first 10 seconds of each track has been played, the player stops. To cancel Intro Scan press the STOP button or press the MODE button

The procedure for storing stations in memory is as follows: 1.) Follow step 3 under “LISTENING TO THE RADIO” in page 10 to select the first station you wish to memorize. Example FM 103.50 MHz. 2.) When the desired station appears on the display press the PROG/MEMORY button inside the cassette key cover. The Preset # “01” indicator flashes and the “MEMORY” indicator appears in the display. MHz MHz 3.) Press the PRESET << / >> buttons inside the cassette key cover to select a preset channel number