Anleitung Sony, modell MZ-F40
Hersteller: Sony Dateigröße: 187.41 kb Dateiname: 3859562111.pdf
Unterrichtssprache:
|
![Lesen Handbuch online](/images/readpdf.png)
|
|
|
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Anleitung Zusammenfassung
2 Press PRESET +/– to select the preset number. 3 Adjust the VOLUME. Tuning in to stations manually (Manual tuning) If you do not know the frequency of a station you may scan by moving the frequency step by step. 1 Press RADIO ON/BAND to turn on the radio. Then press RADIO ON/BAND to select AM, FM1* or FM2*. 2 Press TUNING +/– to tune in a desired station. If you press and hold TUNING +/– for more than a few seconds, the MD Walkman will start tuning the stations automatically. *Operation is the same for FM1 and FM2. zVarious ways of radio reception 1 2 1 Press RADIO ON/BAND. 3 TUNING –,+ RADIO ON/BAND RADIO ON/BAND VOLUME (turn over) MINIDISC Then the FM frequency and “PRESET 1” will appear in the radio display of the MD Walkman. To turn off the radio, press RADIO OFF (p on the remote control). If the radio does not play • Make sure the MD Walkman is not locked. See Locking the controls. • Is the MD playing? Turn off the MD. Notes • Do not remove the power sources while scanning stations, or the received stations may not be stored. • If you cannot receive the stations well, tune in manually and store the stations. Tip Next time you listen to the radio in the same area, you can skip step 3. To improve the radio reception FM: Extend the headphones cord for better reception. AM: Rotate the unit horizontally for optimum reception. When you are listening to a stereo broadcast Set the FM switch (located at the top surface of the MD Walkman) to STEREO. If the reception is poor or noisy, set the FM switch to MONO. When the FM switch is set to MONO the sound will become monaural. 1) Up to 16 stations can be preset, FM1 and FM2 combined. 1 Press and hold ASP until “AREA” flashes in the radio display. FM STEREO / AM MINIDISC MINIDISC MINIDISC to 2/REMOTE zPower sources Aside from alkaline dry batteries, you can use the player on house current or a nickel metal hydride rechargeable battery. Using on house current To use your player on house current, connect the AC power adaptor AC-E45HG (not supplied). When to replace or charge the batteries You can check the battery condition with the battery indication displayed while using the player. B Used batteries v b Weak batteries. Replace both batteries v n The batteries have gone out.“n” flashes in the display, and the power goes off. Note If you turn the radio on with weak batteries, “n” may appear on the MD display. This is not a malfunction. Battery life* Batteries MD Playback Radio BP-DM20 Approx. Approx. nickel metal 6 hours 16 hours hydride rechargeable battery R6 (size AA) Approx. Approx. Sony alkaline 8 hours 30 hours dry batteries LR6(SG) x 2 * The battery life may be shorter due to operating conditions and the temperature of the location. Using on a nickel metal hydride rechargeable battery Before using the rechargeable battery BP-DM20 (not supplied) for the first time, charge it with the AC power adaptor AC-E45HG (not supplied). 1 Connect the AC power adaptor. 2 Insert the rechargeable battery, and close the lid. 3 Press p/CHARGE on the player. "Charge" flashes and the battery indication appears in the display and charging starts. When charging is completed, "Charge" and the battery indication go out. A completely discharged battery takes about 3 hours to charge fully. To stop charging before the battery is fully charged, press p/CHARGE. 4 Disconnect the AC power adaptor. As long as the player is connected to the AC power, the power will be supplied from the AC source instead of the battery. Presetting Stations What the ASP button does (ASP function) When you press the ASP button, the MD Walkman searches and stores receivable stations automatically. If the ASP function does not store the desired station, or you want to customize the preset number of the stations, see Tuning in to stations manually or Storing radio stations manually. Automatic scanning and memorization of a selected band (Auto Memory Scan) The MD Walkman searches and memorizes receivable stations automatically. You can preset 8 stations for AM, 16 for FM (FM 1 and FM2 combined). Operate this function where the radio reception is well. 1 Press RADIO ON/BAND to turn on the radio and then press RADIO ON/BAND to select AM, FM1* or FM2*. 2 Press ENTER until “A” appears in the display. The MD Walkman starts searching and storing stations automatically. 3 Press PRESET +/– to select the preset number you wish to listen. If the reception is poor, you may be able to preset less than 8 stations (for AM)/16 stations (for FM). * The unit will first store stations in FM1 regardless of your choice of FM1 or FM2. Storing stations manually (Manual-Memory function) 1 Turn on the radio and tune in to a desired station. For FM, choose either FM1 or FM2. 2 Press ENTER. 3 While “PRESET” and the preset number are flashing, select a preset number on which you wish to store the station using PRESET +/–. 4 While “PRESET” and the preset number are flashing, press ENTER. 5 Tune in to a station using PRESET +/–. To cancel the ...