Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Selecting a track when playback is stopped 1 Briefly press or ¤ once or several times. y The selected track number is displayed. 2 Press 2; to start CD play. y Playback starts with the selected track. Searching for a passage during playback 1 Keep or ¤ depressed to find a particular passage in a backward or forward direction. y Searching is started and playback continues at a low volume. After 2 seconds the search speeds up. 2 Release the button when you reach the desired passage. y Normal playback continues from this very position. Notes: – During SCAN, searching is not possible. – During SHUFFLE, SHUFFLEREPEAT ALL, REPEAT or while playing a program searching is possible only within the particular track. 14 FEATURES Programming track You can select up to 99 tracks memory in a desired sequence. can store any track more than once. 1 While playback is stopped, select a track or ¤ . 2 Press PROG to store the track. y PROGRAM lights up, the track number programmed and P with the total number of stored tracks are displayed. 3 Select and store all desired tracks in this way. 4 Press 2; to start playback of your selected tracks. y PROGRAM is shown and playback starts. ESAPROG English • You can review the program by pressing PROG for more than 2 seconds. y The display shows all stored tracks in sequence. Notes: – If you press PROG and there is no track selected, SELECtis displayed. – If you try to store more than 99 tracks, FULLis displayed. Erasing the program 1 If necessary, press 9 to stop playback. 2 Press 9 to erase the program. y CLEAr is displayed once, PROGRAM goes off and the program is erased. Notes: The program will also be erased if you – interrupt the power supply, – open the CD lid, or – the set is switched off automatically. 15 FEATURES Storing the last English You can store the last position playback continues from where 1 Switch the slider to RESUME during activate RESUME. y RESUME is shown. 2 Press 9 whenever you want to stop playback. 3 Press 2; whenever you want to resume playback. y RESUME is shown and playback continues from where you have stopped. • To deactivate RESUME, switch the slider to OFF. y RESUME goes off. MODE OFF RESUME HOLD Locking all buttons – HOLD You can lock the buttons of the set. When a key is pressed, no action will be executed then. 1 Switch the slider to HOLD to activate HOLD. y All buttons are locked. HoLd is displayed by pressing any key. If the set is switched off, HoLd is displayed only by pressing 2; and 9. 2 To deactivate HOLD, switch the slider to OFF. Note: When you deactivate HOLD by switching the slider to RESUME and restart, playback continues from where you have stopped. MODE OFF RESUME HOLD 16 FEATURES ESA With a conventional portable you might have experienced that the music were jogging. The ELECTRONIC SHOCK ABSORPTION protects against loss of sound caused shocks. Continuous playback is ensured. does not protect the set against any damage caused by dropping! • Press ESA during playback to activate the shock protection. y . is shown and the protection is activated. • To deactivate the shock protection, press ESA again. y . goes off and the protection is deactivated. ESAMODE PROG English Acoustic feedback The set is equipped with a feature that accompanies various key operations with an acoustic signal. • Keep DBB pressed for more than 3 seconds. If the acoustic signal was deactivated: y bEEP is displayed and the acoustic signal is activated. If the acoustic signal was activated: y no bEEP is displayed and the acoustic signal is deactivated. 17 FEATURES Selecting different English It is possible to play tracks to repeat a track or the first few seconds of each track. 1 Press MODE during playback as often until the display shows either: y SHUFFLE: All tracks of the CD are played in random order until all of them have been played once. y SHUFFLE REPEAT ALL: All tracks of the CD are played repeatedly in random order. y REPEAT: The current track is played repeatedly. y REPEAT ALL: The entire CD is played repeatedly. y SCAN: The first 10 seconds of each of the remaining tracks are played in sequence. 2 Playback starts in the chosen mode after 2 seconds. ESAMODE PROG 3 To return to normal playback, press MODE until the display indication disappears. Remote control (supplied or optionally available) Use the AY 3764 cord remote control. The buttons on the remote control have the same functions as the corresponding buttons on the CD player. 1 If necessary press 9 once or twice until the set is switched off. 2 Firmly connect the remote control to p and the headphones firmly to the remote control’s socket. 3 Turn the volume down with VOL E on the remote control and set VOL E on the CD player to position 8. 18 IN-CAR In-car use (connections supplied Only use the AY 3545 car voltage converter (4.5 V, DC, positive pole to the center pin) and the AY 3501 car adapter cassette. Any other product may damage the set. 1 Put the CD player on a horizontal, vibration-free and stab...