Stimmen - 4, Durchschnittliche Bewertung: 5 ( )

Hersteller: Aiwa Dateigröße: 266.37 kb Dateiname: Unterrichtssprache:

*2 Playback stops when all the tracks in the “pavit” have been played. To return to normal play mode Set the REP1/SHUF switch to OFF. Playback options 15 B Listening to the radio PR SET TU ERMENU .(DOWN)/>(UP) Nx/POWER TUNER PRESET Listening to the radio You can listen to FM broadcasts with and without inserting the “pavit” in the player. 1 Press and hold Nx/POWER until the player is turned on. If the radio was selected when you turned off the player last time, or if the “pavit” is not inserted in the player, the radio will be selected automatically when you turn on the player. 2 Press TUNER repeatedly to select “FM 1” or “FM 2.” 3 Press and hold . (DOWN) or > (UP) for about one second. The player starts scanning the frequencies and stops when it finds a receivable station. If you press . (DOWN) or > (UP) repeatedly, the frequency changes step by step. To turn off the radio Turn off the power by holding down Nx/ POWER until “SEE YOU” appears in the display. If you press Nx/POWER, music data will be played from the position where the playback was last stopped. To enhance detection of receivable stations If there are stations that you want preset but cannot do it automatically because their signals are not strong enough, change the setting of “AUTO STOP LEVEL” to “HIGH” in order to enhance detection of receivable stations. 1 Press MENU. 2 Press . (DOWN) or > (UP) repeatedly to select “AUTO STOP LEVEL.” 3 Press MENU. 4 Press . (DOWN) or > (UP) to select “HIGH*.” In case the same station is preset on two or more preset numbers because its signal is too strong, set the “AUTO STOP LEVEL” to “LOW.” 5 Press MENU. *The default setting at the time of purchase is “MID.” Note Changing the setting of “AUTO STOP LEVEL” does not change the reception sensitivity. To improve the reception The headphone cord functions as the FM antenna. Extend the cord to improve the reception. PRESET TU NERMENU Presetting radio stations You can preset up to 20 FM radio stations, 10 stations each for FM 1 and FM 2. To preset stations automatically (Auto preset) 1 Perform steps 1 and 2 of “Listening to the radio” (page 16) to select the band. 2 Press PRESET. “ ” and the preset numbers appear in the display. 3 Press and hold PRESET for more than 2 seconds. “ ” starts flashing, and the player starts scanning for stations from the lower frequencies. The first received station is preset on the preset number 1, and then the player starts scanning for the next receivable station. If you press Nx/POWER or TUNER during auto presetting, the player stops scanning and exits the auto preset mode, and music data playback starts or the radio is switched to the other band. (Continued) Using the radio 17 To preset a station manually (Manual preset) If there is a station that cannot be preset automatically, you can preset it manually by the following procedure. Before starting, you must exit the auto preset mode (“ ” and the preset numbers should not be displayed). 1 Press TUNER repeatedly to select “FM 1” or “FM 2.” 2 Tune in the station you want to preset. 3 Press and hold PRESET for more than 2 seconds. “ ” and the preset numbers flash in the display. 4 Within 10 seconds, press . or > repeatedly to select the preset number you want to store the station on. The selected preset number starts flashing. 5 Within 10 seconds, press PRESET. To tune in a preset station 1 Press TUNER repeatedly to select “FM 1” or “FM 2.” 2 Press PRESET to display the preset numbers. 3 Press . or > repeatedly to select the preset number of the station you want to tune in. To clear all preset stations Turn off the power, remove the “pavit” from the player, and press and hold Nx/POWER for more than 10 seconds. The preset stations return to those at the time of purchase. B Available features Using the stopwatch You can use the player as a stopwatch. The stopwatch has a lap time feature enabling you to calculate a gap from a previous stored time. You can use the stopwatch both while playing music data and listening to the radio. 1 During music data playback or radio reception, press MENU. 2 Press . or > repeatedly to select “STOPWATCH,” and then press MENU. 3 Press MENU. Time count starts. To stop the stopwatch Press MENU. To resume the time count, press MENU again. To reset the stopwatch After stopping the stopwatch by pressing MENU, press PRESET. To display the lap time Press PRESET at the point you need to check the lap time. The current time is stored in the memory and the lap time (the time length from the previous stored time) is displayed. The time count continues while the lap time is displayed. To update the lap time, press PRESET again. To exit the stopwatch mode Press and hold MENU for more than 2 seconds. The icon for stopwatch “ ” changes to that for music data playback or radio. Tip The stopwatch can count up to 99 minutes 59 seconds 99 centiseconds. To continue the time count from then on, you need to reset the stopwatch. Available features 19 Using the countdown timer T...

Herunterladen

Geben Sie zwei Ziffern: