Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Aiwa Dateigröße: 650.4 kb Dateiname: Unterrichtssprache:

CSD-FD79, CSD-FD77: 2.5 W + 2.5 W (EIAJ, 7 ohms, THD 10% DC). / Power requirements – DC 12 V using eight size C (R14) batteries, AC 120 V, 60 Hz / Power consumption – CSD-FD89: 21 W. CSDFD79, CSD-FD77: 16 W. / Dimensions (W . H . D) – 464.7 . 186 . 314.3 mm (18 3/8 . 73/8 . 12 3/8 in.) / Weight (excluding batteries) – CSD-FD89: 4.1 kg (9 lbs. 1 oz.). CSD-FD79, CSD-FD77: 3.9 kg (8 lbs. 10 oz.). / Accessories – Remote control (1, CSD-FD89/79 only), AC cord (1) Specifications and external appearance are subject to change without notice. COPYRIGHT Please check the copyright laws relating to recordings from disc, radio or external tape for the country in which the machine is being used. If an erroneous display or malfunction occurs Turn off the unit and press POWER 6STANDBY/ON while pressing s. If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display. Leave the unit for a while and turn the power back on. ENGLISH 5 En POWER 6STANDBY/ ON 3-MODE EQ PRESET T-BASS s STOP/SET/CLEAR e PLAY/PAUSE f, g (TUNING -, +) REPEAT/MODE/ SLEEP VOLUME RADIO BAND \PHONES POWER 6STANDBY/ ON 3-MODE EQ PRESET T-BASS s STOP/SET/CLEAR e PLAY/PAUSE f, g (TUNING -, +) REPEAT/MODE/ SLEEP VOLUME RADIO BAND \PHONES TUNER OPERATION A 1 Press RADIO BAND* repeatedly to select the desired band. FM AM The power is turned on and the previously tuned station is received. * or BAND on the remote control (applicable when the AC cord is connected, CSD-FD89/79 only) 2 Press f, g(TUNING -, +) to select a station. During FM stereo reception, is displayed. After listening, press POWER 6STANDBY/ON to turn the power off. For better reception AM FM Extend the rod antenna and orient it for the best reception. The antenna is inside the unit. Position the unit for the best reception. For quick tuning (Auto Search) Keep f, gpressed until the tuner starts searching for a station. When a station is tuned to, the search stops. If the broadcast signal is weak, it does not stop. To stop the search manually, press for g. REPEAT/MODE/SLEEP * -If an FM stereo broadcast contains noise, press the button so that is displayed. Noise is reduced, although reception is monaural. To restore stereo reception, press the button again. -If a high-pitched sound is heard during AM recording, press the button repeatedly to display “b1” or “b2”, so as to eliminate the noise. * or MODE on the remote control (CSD-FD89/79 only) To change the AM tuning interval The default setting of the AM tuning interval is 10 kHz/ step. If you use the unit in an area where the frequency allocation system is 9 kHz/step, change the interval as follows. 1 Press RADIO BAND. 2 Press POWER 6STANDBY/ON while pressing RADIO BAND. When the AM tuning interval is changed, the preset stations are cleared. NOTE If the unit picks up noise from other electrical appliances nearby, like a TV or fluorescent lights, move the unit. To listen with the headphones Connect headphones with a stereo mini plug to the \PHONES jack on the rear of the unit. 6 ENGLISH 0-9, +10 DISPLAY MODE EQ BAND VOL k, i e PLAY/ PAUSE f, g sSTOP (CSD-FD89/79 only) PRESETTING STATIONS You can preset up to 15 stations in each band. 1 Select a station. 2 Press s STOP/SET/CLEAR* once so that “M” is displayed to store the station. A station is assigned a preset number, beginning from 1 in consecutive order for each band. Preset number Frequency * or sSTOP on the remote control (CSD-FD89/79 only) 3 Repeat steps 1 and 2. The next station will not be stored if a total of 15 preset stations have already been stored for a band. To listen to preset stations Select a band then press PRESET or ePLAY/ PAUSE repeatedly. To select a preset number directly with the remote control (CSD-FD89/79 only) Press the numbered buttons 0-9 and +10. Example: To select number 15, press +10 and 5. To select number 10, press +10 and 0. To clear a preset station Select the preset number first. Within 4 seconds, hold down suntil “M” and the preset number disappear. The higher numbers in the band are decreased by one. SOUND ADJUSTMENT Volume or tone adjustment does not affect recording. VOLUME (VOL, CSD-FD89/79 only) Turn VOLUME on the unit or press VOL ior kon the remote control. The volume level is displayed as a number from 0 to 25. • The volume level is automatically set to 14 if the power is turned off when the volume level is set to 15 or more. • Pressing DISPLAY on the remote control displays the adjusted volume level (CSD-FD89/ 79 only). 3-MODE EQ* (equalizer) Press 3-MODE EQ repeatedly until the desired mode is displayed. The equalizer mode changes to R (Rock), P (Pop), J (Jazz) or no equalization, cyclically. Rock - Emphasizes the high and low range of music. Pop - Emphasizes voice and midrange of music. Jazz - Emphasizes the low range of music. * or EQ on the remote control (CSD-FD89/79 only) T-BASS system The T-BASS system enhances the realism of low- frequency sound. Press T-BASS to turn it on or off. En ...

Herunterladen

Geben Sie zwei Ziffern: