Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Sony Dateigröße: 1.98 mb Dateiname: Unterrichtssprache:

If the sound is too high and the level meter reaches to the Over point (marked under the display window), lower the recording level. Volume decreases increases < REC + , –12 dB point Over point Recording does not start in this step. If your source is an externally connected component, be sure to cue the source to the beginning of the material to be recorded before you start playback. 6 Press X again to start recording. To stop recording, press x. The recording level control is switched back to automatic control when you record the next time. Notes • The recording level cannot be adjusted while recording is in progress. If you want to adjust the recording level after you have started the recording, press X to pause the recorder. Then do the procedure from step 5. • You cannot adjust the recording level manually during synchro-recording. 29-GB Checking the remaining time or the recording position You can check the remaining time, track number, etc. when recording or during stop. When you operate the recorder with the supplied remote control, use the buttons and controls shown in parentheses. EDIT MENU/ ENTER ENTER >/. 1 While the recorder is recording or stopped, press MENU (EDIT for 2 seconds or more), press or .) repeatedly until “DISPLAY” flashes in the display, and then press ENTER (ENTER). 2 Press or .) repeatedly until the information you want flashes in the display. Each time you press SELECT, (flip the lever towards .), the display changes as follows. /. or .) repeatedly until “PLAY MODE” flashes in the display, and then press ENTER (ENTER). 2 Press or .) repeatedly to select the play mode, and then press ENTER (ENTER). Each time you press SELECT, (flip the lever towards .), the display item indicated by A changes as follows. Pressing ENTER (ENTER) while A is flashing causes the play mode to change. The new mode then appears in the window indicated by B. 32-GB Display window Shuf.Rep AB On A/B Normal/(none) All the tracks are played once. r AllRepeat/ All the tracks are played repeatedly. r 1 Repeat/ A single track is played repeatedly. r Shuf.Rep/ After the currently selected track finishes playing, the remaining tracks are played repeatedly in random order. 33-GB Emphasizing bass (DIGITAL MEGA BASS) The Mega Bass function intensifies low frequency sound for richer quality audio reproduction. It affects only the sound from the headphones/earphones. /. 1 Press MENU (EDIT for 2 seconds or more), press or .) repeatedly until “BASS” flashes in the display, and then press ENTER (ENTER). 2 Press or .) to select the item, and then press ENTER (ENTER). Each time you press SELECT, (flip the lever towards .), A and B change as follows. Display window BASS 2 A B 34-GB On A/B BASS OFF/(none) Normal play r BASS 1/ BASS Mega Bass (moderate effect) r BASS 2/ BASS Mega Bass (strong effect) Notes • If the sound becomes distorted when emphasizing bass, turn down the volume. • The Mega Bass function does not affect the sound that is being recorded. Checking the remaining time or the playing position You can check the track name, disc name, etc. during playback. 1 While the recorder is playing, follow steps 1 and 2 of “Checking the remaining time or the recording position” (page 30). The display changes as follows. On A LapTime The elapsed time of the current track. r 1 Remain The remaining time of the current track. r AllRemain The remaining time after the current location. continued 35-GB 2 Press ENTER (ENTER). The display changes as follows. The information selected in step 2 appe...

Herunterladen

Geben Sie zwei Ziffern: