Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Elapsed playing time of each track Track number in play Plug type: 3.5 mm stereo SL-SX280 Decrease Increase Close the lid. Operation Button Display/reference To pause play Press during play. Press again to restart play. S-XBS VOL TRAIN TRAINTRAIN ALL ALLALL 1 M C To stop play Stop mode Press during play. OPROFF S-XBS VOL TRAIN TRAINTRAIN ALL ALLALL 1 M C Total number of tracks Total playing time To turn off the unit Off mode Press during stop mode. OPROFF S-XBS VOL TRAIN TRAINTRAIN ALL ALLALL 1 M C Skipping tracks Press during play. (Press [:] twice to skip to the beginning of the previous tracks.) Press and hold during play. Backward Forward .During program play (page 4), these buttons are used to skip forward or back through the programmed sequence of tracks. .You cannot skip to tracks that have been played in random or random repeat play (page 4). .During program play, 1-track repeat play, random play and random repeat play (page 4), search operation is limited to the current track only. Searching through tracks Follow steps 1–5. Resume function In step 2: Connect the stereo earphones and the wired remote control to the headphone jack [E]. (Plug in firmly.) The player stores the track where you stopped play and In step 5: The volume range is 0-25. (Press and hold to change the volume successively.) The volume changes if you press [1;] (main unit) or [./1] (remote control) when pressed while the level is displayed. If any other display is shown, it changes to show the current play resumes from the beginning of the track. level. (The volume returns to 10 when you disconnect the power source.) The resume function is canceled (play starts from the .Play stops automatically when all the tracks have been played. first track) if you open the lid when the unit is in stop .If the unit has been connected to the car audio system, set this unit’s volume to 10, then adjust the volume level on the system. mode. It is also usually canceled when you replace the CD while the unit is off. Note! .The resume function may work if you replace the CD while the unit is off. .If you turned the unit off near the end of the track, play may resume from the beginning of the next track. .The resume function works automatically and cannot be turned off. Removing discs1 Press [.,OPR OFF] to stop play and disc rota tion. 2 Slide [OPEN 1] to open the lid. 3 Press [PUSH] to release the disc. Do not stop the disc by hand or try to remove it before it stops rotating. This can damage CDs. PUSH PUSH Note1 Never insert foreign objects into the unit body. Auto power off function If you leave the unit in stop mode for about 10 minutes (30 seconds if disc isn't loaded), it turns off to save the batteries. For your reference: “ ” indication This indication appears for about 30 seconds if [1;] (main unit) or [./1] (remote control SL-SX280 ) is pressed when no disc is loaded in the unit or if the disc is not properly secured. “*” indication This indication appears for about 10 minutes when the lid is opened. (However, the indication does not appear when the unit is powered off.) Note on CD-R and CD-RW This unit can play CD-DA format audio CD-R and CD-RW that have been finalized§ upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording. §Finalizing is a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW. HOLD Function HOLD HOLD mode SL-SX280 This function causes the unit to ignore short, accidental button presses. (The disc lid can still be opened and closed.) The HOLD function prevents the following: .The unit is powered on accidentally when not in use, causing the batteries to run down. .A button is accidentally pressed during play, interrupting the operation. SL-SX280 The unit and wired remote control have HOLD functions, each of which works independently. To use the HOLD function Set [HOLD] to the HOLD position. “(” indication When the unit is in HOLD mode, pressing any button causes the indication “(” to appear on the display. When the unit is powered off The “(” indication appears only when [1;] (main unit) is pressed. Before operating the buttons Be sure to move [HOLD] to release the unit from the HOLD mode. Other Play Methods The letters such as A in the illustrations refer to the descriptions in the “Location of Controls” section. (See page 2.) Skip play Repeat play/Random play Changing the sound quality The disc plays from the specified track through to the Press [MODE] while disc is playing or Press during play or stop mode. end, then play stops automatically. when unit is in stop mode. Main unit Preparation: Put unit in stop mode. 1 Select the desired track. D E MEMORY/RECALL EQ VOL VOL OPR G The setting is switched in the sequence indicated below Remote control SL-SX280 each time [MODE] is pressed. 1-track repeat (1 `)( ----------------] One track is repeated. | v | All-track repeat (`) | EQ OPRO F All the tracks on the disc are repeated. | (Beep) v| Random (RANDO...