Stimmen - 5, Durchschnittliche Bewertung: 4.2
(
)
)
|
Anleitung Zusammenfassung
To reduce the risk of death by electric shock: 1. Always unplug immediately after using. 2. Do not place or store appliance where it can fall or be pulled into a tub or sink. 3. Do not place in, or drop into, water or other liquids. 4. If an appliance falls into water, unplug it immediately. Do not reach into the water. WARNING — To reduce the risk of burns, electrocution, fire, or injury to persons: 1. Do not overfill steamer as it can cause hot water to boil out. 2. This appliance should not be used near children or by the physically challenged. Unsupervised use could result in fire or personal injury. This appliance is not recommended for use by children. 3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water. Do not attempt to repair the appliance. Incorrect reassembly or repair could cause a risk of fire, electric shock, or injury to persons when the appliance is used. Return the appliance to an authorized service center for examination and repair. 5. Keep the cord away from heated surfaces. Do not pull or twist cord. Let appliance cool completely before putting away. Loop cord loosely around appliance when storing. 6. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. 7. To reduce likelihood of circuit overload, do not operate another high-wattage appliance on the same circuit. 8. Do not use extension cord to operate appliance. While it is not recommended, if an extension cord is absolutely necessary, a 15 ampere rated cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that the cord cannot be pulled or tripped over. 9. Use caution when changing attachments as they may contain hot water from condensation. T-nozzle should never be placed on the unit when in use or when preheating. Ensure the attachments are dry or cooled off to avoid contact with hot water. 10. Do not hold steamer during use. Steamer must sit on floor while steaming. 11. Allow unit to cool before emptying reservoir for storage. 12. Use caution when removing hose cap. Remove slowly. 13. Do not use if unit has been dropped or damaged. 14. Always disconnect appliance from electrical outlet when filling with water or emptying and when not in use. 15. Do not switch on the unit before the hose cap has been secured with the unit. CAUTION — 1. This appliance should never be left unattended when plugged in. 2. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. 3. Never drop or insert any object into any opening or hose. 4. Do not place the steam nozzle directly on any surface or on the appliance power cord while it is hot or plugged in. Use the door hook provided. 5. This product emits hot steam during use. Do not touch T-nozzle when product is in use. 6. Do not steam garments while on a person. 7. Before unit is turned on, the hose must be extended and hanging on door hook. 8. Never yank cord to disconnect from outlet. Instead, grasp plug and pull to disconnect. 9. Burns could occur from touching hot metal parts, hot water, or steam. Use care when, you turn a steam appliance upside down - there may be hot water in reservoir. 10. Use caution when carrying steamer as it contains hot water. 11. Caution: hose will be hot when in use. Avoid prolonged contact. SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY NOT FOR COMMERCIAL OR INDUSTRIAL USE UNPACKING INSTRUCTIONS Place the box on a large, sturdy flat surface. Carefully remove the appliance from the packing material. Keep all plastic bags away from children. STEAMER ASSEMBLY/DISASSEMBLY Attaching the Steamer Hose 1. Place hose connector to unit 2. Press buttons on side 3. Place in opening and release. locks in automatically. Removing the Steamer Hose (make sure unit has cooled) To remove, just press side buttons and pull out. Attachments: To add lint or crease attachments. simply place on T-nozzle. Hose may be stiff upon removal from box. Hose will relax after initial use. T-handle will sit properly on door hook once hose is relaxed. Lint Crease OPERATING INSTRUCTIONS FILLING THE WATER RESERVOIR (PRIOR TO PLUGGING IN THE APPLIANCE) Remove the hose cap. Fill the reservoir with clean tap water to the desired level or until water reaches “Max Fill” line on side of unit. DO NOT OVERFILL as this will cause water to boil out of steamer and spill. Empty until water is just under the overfill indicator. DO NOT FILL THE CONTAINER WITH HOT WATER. Hanging the t-nozzle on the door hook GETTING ...