Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
..Edit Channel Name (analogue channels only): Assign your own channel name. ..Edit Channel Number: Edit the number by pressing the number buttons desired. NNSome area may not be able to support Edit Channel Name and Edit Channel Number function. ..Delete: You can delete a channel to display the channels you want. ..Deselect All: Deselect all the selected channels. NNYou can only select Deselect All when one or more channels are selected. ..Select All: Select all the channels in the channel list. ..Retuning Channels OOMENUm > Channel > ENTERE ¦¦Antenna (Air / Cable) t Before your television can begin memorising the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or Cable system). ¦¦Country The PIN input screen appears. Enter your 4 digit PIN number. ..Digital Channel: Change the country for digital channels. ..Analogue Channel: Change the country for analogue channels. ¦¦Auto Tuning (depending on the country) Scans for a channel automatically and stores in the TV. NNAutomatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked, the PIN input window appears. ..Auto Tuning Air / Cable: Select the antenna source to memorise. Digital & Analogue / Digital / Analogue: Select the channel source to memorise. When Antenna Source is set to Air or Cable: When selecting Cable > Digital & Analogue or Digital: Provide a value to scan for cable channels. ––Search Mode (Full / Network / Quick): Scans for all channels with active broadcast stations and stores them in the TV. NNIf you select Quick, you can set up the Network, Network ID, Frequency, Modulation and Symbol Rate manually by pressing the button on the remote control. ––Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual. ––Network ID: When Network is Manual, you can set up Network ID using the numeric buttons. ––Frequency: Displays the frequency for the channel. (differs in each country) ––Modulation: Displays available modulation values. ––Symbol Rate: Displays available symbol rates. ..Cable Search Option (depending on the country & cable channels only) Sets additional search options such as the frequency and symbol rate for a cable network search. Start frequency / Stop frequency: Set the start or stop frequency (differs in each country). Symbol Rate: Displays available symbol rates. Modulation: Displays available modulation values. ¦¦Manual Tuning Scans for a channel manually and stores in the TV. NNIf a channel is locked, the PIN input window appears. NNAccording to channel source, Manual Tuning may be supported. When Antenna Source is set to Air or Cable: ..Digital Channel Tuning: Scans for a digital channel manually and stores in the TV. Press the ACBD (New) button to search the digital channels. When scanning has finished, a channel is updated in the channel list. ––When selecting Antenna > Air: Channel, Frequency, Bandwidth ––When selecting Antenna > Cable: Frequency, Modulation, Symbol Rate ..Analogue Channel Tuning: Scans for a analogue channel. Press the ACBD (New) button to search the digital channels by adjusting the Programme, Colour System, Sound System, Channel, Search. NNChannel mode ––P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode. ––C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel. ¦¦Edit Channel Number (Disable / Enable) (depending on the country) Use this to change channel number. When channel number is changed, channel information is not updated automatically. ¦¦Fine Tune (analogue channels only) If the signal is weak or distorted, fine tune the channel manually. NNFine tuned channels are marked with an asterisk “*”. NNTo reset the fine-tuning, select Reset. ¦¦Transfer Channel List (depending on the country) Imports or exports the channel map. You should connect a USB storage to use this function. NNThe PIN number input screen appears. Enter your 4 digit PIN number. ..Import from USB: Import channel list from USB. ..Export to USB: Export channel list to USB. ..Changing the Preset Picture Mode OOMENUm > Picture > Picture Mode > ENTERE ¦¦Picture Mode Select your preferred picture type. NNWhen connecting a PC, you can only make changes to the Entertain and Standard. ..Dynamic: Suitable for a bright room. ..Standard: Suitable for a normal environment. ..Natural: Suitable for reducing eye strain. ..Movie: Suitable for watching movies in a dark room. ..Entertain: Suitable for watching movies and games. NNIt is only available when connecting a PC. ..Adjusting Picture Settings ¦¦Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) Your television has several setting options for picture quality contro...
Dieses Handbuch ist für folgende Modelle:Monitore - HE40A (2.91 mb)