Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Master-Slave Operation: This function will allows you to link units together to run in a Master- Slave mode. In Master-Slave operation one unit will act as the controlling unit and the others will react to the controlling units built-in programs. Any unit can act as a Master or as a Slave however, only one unit can be programmed to act as the “Master.” Master-Slave Connections and Settings: 1. Daisy chain your units via the XLR connector on the rear of the unit. Use standard XLR microphone cables to link your units together. Remember that the Male XLR connector is the input and the Female XLR connector is the ouput. The first unit in the chain (master) will use the female XLR connector only. The last unit in the chain will use the male XLR connector only. 2. Set the “Master” unit to your desired mode of operation. 3. For the “Slave” unit(s), press the MODE button until “XXX3” is dis- played. 4. Use the UP and DOWN buttons to adjust the address. The slave unit must be set to the same address as the Master unit. 5. Connect the “Slave” unit or units and they will automatically start to follow the “Master.” Manual Dimmer: 1. Plug the fixture in and press the MODE button until “XXX4” is dis- played. 2. Use the UP and DOWN buttons to adjust the LED intensity. This onboard control mode is regulated by the max and minimun intenstiy settings. These settings are set in the DIM MAX SETTING and DIM MIN SETTING onboard control modes. Dim Max Setting: The Dim Max Setting will set the maximum dimness level for manual control and DMX mode. 1. Plug the fixture in and press the MODE button until “XXX5” is dis- played. 2. Use the UP and DOWN buttons to adjust the maximum value of the LED dimmer. The setting can be adjusted between 50-100%. Dim Min Setting: The Dim Min Setting will set the minimum dimness level for manual control and DMX mode. 1. Plug the fixture in and press the MODE button until “XXX6” is dis- played. 2. Use the UP and DOWN buttons to adjust the minimum value of the LED dimmer. The setting can be adjusted between 0-30%. DMX Mode: Operating through a DMX controller gives the user the freedom to create their own programs tailored to their own individual needs. This function also allows you to use your fixtures as spot lights. The ELED Fresnel has 2 DMX modes: 1 Channel mode and 2 Channel mode. See page 9 for each modes’ DMX traits. Remember the maximum and minimum dimness levels are set in the Dim Max & Dim Min Settting menus. 1. This function will allow you to control each individual fixture’s traits with a standard DMX 512 controller such as the Elation® Show Designer™ or the Elation® DMX Operator™. 2. To run your fixture in DMX mode, plug in the fixture via the XLR con- nections to any standard DMX controller. Select your desired DMX mode, and then press the UP or DOWN buttons to adjust the DMX address. XXX = DMX Address 3. To run the 1 Channel Mode, press the MODE button until “XXX1” is displayed. This is the DMX addressing for the 1 Channel Mode. 4. To run the 2 Channel Mode, press the MODE button until “XXX2” is displayed. This is the DMX addressing for the 2 Channel Mode. 3. Please see pages 10-12 for DMX values and traits Elation Professional - - ELED Fresnel Instruction Manual Page 7 Elation Professional - - ELED Fresnel Instruction Manual Page 8 ELED Fresnel Cleaning ELED Fresnel 1 Channel Mode - DMX Values and Functions Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried out periodically to optimize light output. 1. Use normal glass cleaner and a soft cloth to wipe down the outside casing. 2. Clean the external optics with glass cleaner and a soft cloth every 20 days. 3. Always be sure to dry all parts completely before plugging the unit back in. Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust, dew). Channel Value Function 1 0 - 255 DIMMER 0% - 100% ELED Fresnel 2 Channel Mode - DMX Values and Functions Channel Value Function 1 0 - 255 DIMMER 0% - 100% 2 0 - 255 STROBING SLOW - FAST ELED Fresnel Trouble Shooting Listed below are a few common problems the user may encounter, with solutions. Unit not responding to DMX: 1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on some other DMX devices pin 2 may be ‘hot’). Also, check that all cables are connected to the right connectors; it does matter which way the inputs and outputs are connected. Unit does not respond to sound: 1. Quiet or high pitched sounds will not activate the unit. Elation Professional - - ELED Fresnel Instruction Manual Page 10 Elation Professional - - ELED Fresnel Instruction Manual Page 9 ELED Fresnel Warranty ELED Fresnel Specifications 2-YEAR LIMITED WARRANTY A. Elation Professionals® hereby warrants, to the original purchaser, Elation Professionals ® products to be free of manufacturin...