Stimmen - 1, Durchschnittliche Bewertung: 5 ( )

Hersteller: Vixen Dateigröße: 875.66 kb Dateiname: Unterrichtssprache:

The electrical discharge lamp lights and the electrical discharge begins. The electrical discharge lamp is turned off when the electrical discharge ends, the charge lamp lights, and the charge starts automatically. Leave just as it is until the charge is completed. When the charge is completed, the charge lamp is turned off. Detach the battery from the charger. [Time of refreshing and charge] Battery BP02 is discharged from the state of a full charge at about 960 minutes and the charge is completed from the electrical discharge at about 130 minutes. However, the electrical discharge time is proportional to the remainder capacity of the battery. Moreover, the time required for refreshing might be different from the above-mentioned time according to a surrounding temperature and the state of the battery. 15 PENTAX R-300 (p01-19) 10/30/02 11:21 AM Page 16 2 DISPLAY AND KEYBOARD 2 DISPLAY AND KEYBOARD 2-1 Display and Keyboard 7 8 9 4 5 6 1 2 3 0 . +/- ABCABC DEFDEF GHIGHI JKLJKL MNOMNO PQRSPQRS TUVTUV WXYZWXYZ ESCESC ENTENT HELPHELP LaserLaser F1 F2 F3 F4 F5 Alphanumeric and +/- key Enter key Power supply key Function key Illumination key ESC key Laser plummet and Electronic vial key 2-2 Operation Key Key Description [POWER] ON/OFF of power supply [ESC] Returns to previous screen or cancels an operation. [Illumination] Turns the illumination of the LCD display and telescope reticle on and off. [ENT] Accepts the selected (highlighted) choice or the displayed screen value. [Laser] Displays the laser plummet *1, electronic vial function, and the LD point screen when you push the laser plummet/electronic vial key. (Refer to “2-5 Laser Pointer”, “3-2 Laser plummet”, and “3-5 Leveling with Electronic vial”). *1:Only the product with the laser plummet function [ Alphanumeric] At the numerical value screen, the numerical value and the sign ‘.’ displayed are input. The English characters printed right under numeric of each key are input. [HELP] Pressing [lLLU]+[ESC] key causes a help menu to appear in A MODE or B MODE or causes a help message to appear. 16 PENTAX R-300 (p01-19) 10/30/02 11:21 AM Page 17 2 DISPLAY AND KEYBOARD 2-3 Function Key Display F. Key Description Mode A [MEAS] F1 Pressing this key one time measures the distance in normal mode another measurement type can be selected by Initial Setting 2. Pressing this key twice measures the distance in coarse mode another measurement type can be selected by Initial Setting 2. [TARGET] F2 Select the target type by following order. SHEET/ REFRECTORLESS /PRISM (Reflectorless type instrument) SHEET/PRISM (Prism type instrument) [0 SET] F3 Resets the horizontal angle to 0° 0’ 0” by pressing twice. [DISP] F4 Switches the display composition in the order “H.angle/H.dst./V.dst.”, “H.angle/V.angle/S.dst.” and “H.angle/V.angle/H.dst./S.dst./V.dst.”. [MODE] F5 Switches the screen between MODE A and MODE B. Mode B [S.FUNC] F1 PowerTopoLite or PSF [ANG SET] F2 Brings up the angle setting screen for setting angle-related parameters (H.ANGLE/%GRADE, H.ANGLE INPUT and R/L REVERSE). [HOLD] F3 Pressing this key twice retains (holds) the horizontal angle shown on the display. [CORR] F4 Brings up the screen for changing the Target constant, Temperature, Pressure setting. [MODE] F5 Switches the screen between MODE A and MODE B. Other functions [f] F1 Moves the cursor to the left. [e] F2 Moves the cursor to the right. [] F1 Goes back five Items on the screen. [] F2 Goes forward five items on the screen. [RETICLE] F3 Changing the Reticle illumination when pressing Illumination key. [g] F3 Moves the cursor up. [LCD] F4 Changing the LCD contrast when pressing Illumination key. [h] F4 Moves the cursor down. [ILLU] F5 Changing the LCD illumination when pressing Illumination key. [CLEAR] F5 Clear the figure. [SELECT] F5 Open the selection window. PENTAX R-300 (p01-19) 10/30/02 11:21 AM Page 18 2 DISPLAY AND KEYBOARD [How to move the menu number] Example: The cursor is located at Menu 1. Press the numeric key 0 and 2 to move to Menu 2 or press [F4] [h]. ANGLE SET 1.ANGLE / %GRADE : ANGLE 2.H. ANGLE INPUT : 092° 30' 20" 3.R/L REVERSE : RIGHT SELECT ANGLE SET 1.ANGLE / %GRADE : ANGLE 2.H. ANGLE INPUT : 092° 30' 20" 3.R/L REVERSE : RIGHT SELECT 18 PENTAX R-300 (p01-19) 10/30/02 11:21 AM Page 19 2 DISPLAY AND KEYBOARD 2-4 Alphanumeric Input The point name is inputted by the Alphanumeric keys as following. Key Letter under Key Letter & Figure order to input [0] [@][.][_][-][:][/][0] [1] PQRS [P][Q][R][S][p][q][r][s][1] [2] TUV [T][U][V][t][u][v][2] [3] WXYZ [W][X][Y][Z][w][x][y][z][3] [4] GHI [G][H][I][g][h][i][4] [5] JKL [J][K][L][j][k][l][5] [6] MNO [M][N][O][m][n][o][6] [7] [ ][?][!][_][ ][^][|][&][7] [8] ABC [A][B][C][a][b][c][8] [9] DEF [D][E][F][d][e][f][9] [.] [.][,][:][;][#][(][)] [+/-] [+][-][*][/][%][=][<][>] 2-5 LD POINT, Laser Pointer The Laser pointer function turns the laser beam on continuously to become the aiming point so that visual confirmation is possible. q When the [LD POINT]...

Herunterladen

Geben Sie zwei Ziffern: