Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung iOptron, modell SmartStar 8802

Hersteller: iOptron
Dateigröße: 560.86 kb
Dateiname:

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Use keys to scroll through the fields. The last line of this screen is for setting time zone information (add or subtract 60 minutes (Min.) per time zone). Examples: minutes “behind” UT or “ahead of” UT New York: 300 Min. “behind” UT Los Angeles: 480 Min. “behind” UT Rome: 60 Min. “ahead of” UT Sydney: 600 Min. “ahead of” UT Press ENTER when finished. The mount is now ready to find (GOTO) and track objects. Step 12. Select and Slew to an object Press Menu button. Scroll to “Select and Slew” Press ENTER. Step 13. Select a category (ex. “Planets, Sun, Moon”) by scrolling with the arrow keys. Press ENTER. Then select an object (ex. “Moon”) by scrolling with the arrow keys. Press ENTER. The telescope will automatically slew to the object and lock on. It will automatically begin to track once it locks on to the object. Step 14. Sync to Target (Use this to center and synchronize the object selected in Step 13). Press MENU. Scroll to “Sync. To Target”. Press ENTER. Next use the arrow keys (^Ў<>) to center the object in the eyepiece. Then press ENTER again to synchronize the object with the memory. To slew to other objects simply repeat steps 12 and 13. You do not need to repeat step 14 except for adjustments as needed. (Refer to the full online manual for 1-star and 2-star alignments. Sync to Target is similar to 1-star Alignment except that you choose the object to align to.) iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569.0200 | Toll Free (866) 399.4587 | Flip switch This page shows specific directions for the 80mm Refractor, 114mm Newtonian, and the 90mm Maksutov (depending on which telescope tube your unit may come with). .80mm Refractor (#8502 and #8802)……..................................................... 45. diagonal eyepiece Focus knob Insert 45. diagonal: Insert the diagonal into the eyepiece side of the telescope. Tighten the thumbscrews to a firm feel only. Insert the eyepiece: Slide the eyepiece into the open end of the diagonal. Tighten the thumbscrews to a firm feel only. Remove the dust cover from the other end of optical tube assembly. Use the focus knob to bring objects into focus. You may need to turn the focus knob quite a few turns to focus your telescope for the first time. Always start observing using a low power eyepiece (such as a 25mm eyepiece) to get a nice wide field of view. Later you can change to high power if so desired. Higher powered eyepieces have a much narrower field of view. So it’s more difficult to initially locate objects using higher powered eyepieces. .114mm Newtonian (#8503 and #8803) ……................................................. Point toward open Attach the red dot finder scope to the telescope tube (#1): end of telescope First remove the two washers on the tube. Then place the finder scope onto the two bolts and re-attach the washers Bolts securely. The finder scope should face towards the open end of the tube (see arrow in diagram). Turn on the beam using the swi...