Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: iOptron Dateigröße: 560.86 kb Dateiname: Unterrichtssprache:

Remove the dust cover from the other end of optical tube assembly. Use the focus knob to bring objects into focus. You may need to turn the focus knob quite a few turns to focus your telescope for the first time. Always start observing using a low power eyepiece (such as a 25mm eyepiece) to get a nice wide field of view. Later you can change to high power if so desired. Higher powered eyepieces have a much narrower field of view. So it’s more difficult to initially locate objects using higher powered eyepieces. .114mm Newtonian (#8503 and #8803) ……................................................. Point toward open Attach the red dot finder scope to the telescope tube (#1): end of telescope First remove the two washers on the tube. Then place the finder scope onto the two bolts and re-attach the washers Bolts securely. The finder scope should face towards the open end of the tube (see arrow in diagram). Turn on the beam using the switch on the side. (note: you may need to remove the plastic insulation placed next to the Switch battery underneath) .90mm Maksutov-Cassegrain (#8504 and #8804)…………………………………. Diagonal Install Diagonal by screwing it onto the back end of the scope. You can adjust the position of the diagonal by loosening the free-spinning threader on the diagonal. Eyepiece Install the Finderscope by sliding the dovetail plate onto the sleeve (see arrow) and tightening the side screw. The eyepiece can be placed on the end of the scope or on the side (see next step). Secure the eyepiece using the side screw. Use the focus knob to adjust the focus. This picture shows the eyepiece on the side. Remove the protective cap to insert the eyepiece. The diagonal is not used for side viewing. Use the flip switch to flip the internal mirror to view from the side or the end of the scope. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569.0200 | Toll Free (866) 399.4587 | ...

Herunterladen

Geben Sie zwei Ziffern: