Battery condition will affect the ability of the machine to climb a slope. Genie Z-34/22 & Genie Z-34/22N PartNo.43654 Second Edition • Ninth Printing Operator's Manual Driving on a slope Determine the uphill, downhill and side slope ratings for the machine and determine the slope grade. Maximum slope rating, counterweight uphill (gradeability): 20% (11°) Maximum slope rating, counterweight downhill: 20% (11°) Maximum side slope rating: 20% (11°) Note: Slope rating is subject to ground condition

That means every new operator should perform a pre-operation inspection, function tests, and a workplace inspection before using the machine. Genie Z-34/22 & Genie Z-34/22N PartNo.43654 Second Edition • Ninth Printing Operator's Manual Emergency Stop Push in the red Emergency Stop button to the off position at the ground or platform controls to stop all machine functions. Repair any function that operates when the red Emergency Stop button is pushed in. Selecting and operating the ground control

Using the machine for anything other than lifting personnel, along with their tools and materials, to an aerial work site is unsafe and dangerous. Only trained and authorized personnel should be permitted to operate a machine. If more than one operator is expected to use a machine at different times in the same work shift, they must all be qualified operators and are all expected to follow all safety rules and instructions in the operator's, safety and responsibilities manuals. That means every

B. Plug in a radio or lamp to verify that electrical power is present. C. Press the GFCI TEST button in order to trip the system and stop the flow of electricity. D. If the radio or lamp is still functioning, the GFCI is not working properly. Contact an Authorized Service Dealer. E. If the power goes off, the GFCI is working properly. To restore power, press the GFCI RESET button. 2.12.4 Stopping the POWERLINKTM GENERATOR A. Turn off electrical appliance or tool. B. Move system reset switch to O

front and rear. Inspect condition of tires for wear, deterioration, cuts, and damage. Replace worn, damaged or deteriorated tires before operating machine, using only tires of original size, type and construction. 2.1.4. Check Accelerator Pedal. With engine off, depress pedal fully. The pedal must move freely, and immediately return to original position when released. 2.1.5. Check Engine oil and Transmission fluid. Raise empty cargo bed and carefully secure with prop rod. Add oil as needed to br

Safety Instructions & Operator’s Manual For TURF CRUISER ™ ™ TRAIL CRUISER UTILITY VEHICLES † SERIES 1 UV1621BV (85668) Thank you for buying a Turf Cruiser™/Trail Cruiser™ Utility Vehicle! Before operating your machine, read this manual carefully and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 thru 6. Remember that all power equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance with the operating instruction

4-2 TOOLS ........................................................................................... 4-3 SAFETY FIRST ............................................................................... 4-3 DESCRIPTION ................................................................................ 4-4 COMPONENT LOCATOR ............................................................... 4-5 BUSH HOG® UTILITY VEHICLE WORKSHOP MANUAL – SECTION 4: FUEL SYSTEM SPECIFICATIONS FUEL SYSTEM Type Gasoline Style

7-2 Type: Rack and Pinion ............................................................. 7-2 TOOLS ........................................................................................... 7-3 SAFETY FIRST ............................................................................... 7-3 DESCRIPTION ................................................................................ 7-4 Steering .................................................................................... 7-4 REPAIR .......