Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Genie Dateigröße: 814.21 kb Dateiname: 43654.pdf Unterrichtssprache:

That means every new operator should perform a pre-operation inspection, function tests, and a workplace inspection before using the machine. Genie Z-34/22 & Genie Z-34/22N PartNo.43654 Second Edition • Ninth Printing Operator's Manual Emergency Stop Push in the red Emergency Stop button to the off position at the ground or platform controls to stop all machine functions. Repair any function that operates when the red Emergency Stop button is pushed in. Selecting and operating the ground controls will override the platform Red Emergency Stop button. Auxiliary Controls Use auxiliary power if the primary power source fails. 1 Turn the key switch to ground or platform control. 2 Pull out the red Emergency Stop button to the on position. 3 Move the lift/drive select switch to the appropriate position (if equipped) when operating the auxiliary controls from the platform. 4 Press down the foot switch when operating the auxiliary controls from the platform. 5 Simultaneously hold the auxiliary power switch on and activate the desired function. The boom, steer and drive functions will operate with auxiliary power. OPERATING INSTRUCTIONS Operation from Ground 1 Turn the key switch to ground control. 2 Pull out the red Emergency Stop button to the on position. 3 Be sure both battery packs are connected before operating the machine. To Position Platform 1 Hold the function enable switch to either side. 2 Move the appropriate toggle switch according to the markings on the control panel. Drive and steer functions are not available from the ground controls. Machines equipped with Platform Level Control Disable Function: The platform level toggle switch will not operate when the boom is raised past the drive speed limit switch. PartNo.43654 Genie Z-34/22 & Genie Z-34/22N Operator's Manual Second Edition • Ninth Printing OPERATING INSTRUCTIONS Operation from Platform 1 Turn the key switch to platform control. 2 Pull out both ground and platform red Emergency Stop buttons to the on position. 3 Be sure that both battery packs are connected before operating the machine. To Position Platform 1 Set the boom function speed controller to the desired speed. Note: Drive and steer functions are not affected by the boom function speed controller. 2 Move the lift/drive select switch to the lift position (if equipped). 3 Press down the foot switch. 4 Move the appropriate toggle switch according to the markings on the control panel. Machines equipped with Platform Level Control Disable Function: The platform level toggle switch will not operate when the boom is raised past the drive speed limit switch. To Steer 1 Move the lift/drive select switch to the drive position (if equipped). 2 Press down the foot switch. 3 Turn the steer wheels with the thumb rocker switch located on top of the drive control handle. Use the color-coded direction arrows on the platform controls and the drive chassis to identify the direction the wheels will turn. To Drive 1 Move the lift/drive select switch to the drive position (if equipped). 2 Press down the foot switch. 3 Increase speed: Slowly move the drive control handle off center. Decrease speed: Slowly move the drive control handle toward center. Stop: Return the drive control handle to center or release the foot switch. Use the color-coded direction arrows on the platform controls and the drive chassis to identify the direction the machine will travel. The travel alarm will sound when the drive controller is moved off center. Note: When the turntable is rotated so the boom is past the non-steer tires, the machine may move in the opposite direction that the drive and steer controls are moved. Machine travel speed is restricted when the booms are raised or extended. Battery condition will affect the ability of the machine to climb a slope. Genie Z-34/22 & Genie Z-34/22N PartNo.43654 Second Edition • Ninth Printing Operator's Manual Driving on a slope Determine the uphill, downhill and side slope ratings for the machine and determine the slope grade. Maximum slope rating, counterweight uphill (gradeability): 20% (11°) Maximum slope rating, counterweight downhill: 20% (11°) Maximum side slope rating: 20% (11°) Note: Slope rating is subject to ground conditions and adequate traction. The term gradeability applies to the counterweight uphill configuration only. Be sure the boom is below horizontal and the platform is between the non-steer tires. To determine the slope grade: Measure the slope with a digital inclinometer OR use the following procedure. You will need: carpenter’s level straight piece of wood, at least 3 feet / 1 m long tape measure Lay the piece of wood on the slope. At the downhill end, lay the level on the top edge of the piece of wood and lift the end until the piece of wood is level. OPERATING INSTRUCTIONS While holding the piece of wood level, measure the vertical distance from the bottom of the piece of wood to the ground. Divide the tape measure distance (rise) by the length of the piece ...

Herunterladen

Geben Sie zwei Ziffern: