Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Sony Dateigröße: 1.76 mb Dateiname: Unterrichtssprache:

Pull the latches in the direction of the arrows (1). The memory module is released. . Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2). Remove the new memory module from its packaging. 149nNUpgrading Your VAIO Computer Slide the memory module into the memory module slot and push it in until it clicks into place. ! Do not touch any other components on the motherboard. Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open slot. Replace the memory module compartment cover. 10 Tighten the screw on the bottom of the computer. 11 Reinstall the battery pack and turn on the computer. 150nNUpgrading Your VAIO Computer Viewing the Amount of Memory To view the amount of memory 1 Turn on the computer. 2 Click Start, point to All Programs, and click VAIO Control Center. 3 Double-click the System Information folder in the VAIO Control Center window. 4 Double-click the System Information icon in the System Information folder. You can view the amount of system memory. If the additional memory does not appear, repeat the whole procedure and restart the computer. 151nNPrecautions Precautions This section describes safety guidelines and precautions to help you protect your VAIO computer from potential damage. . On Handling the LCD Screen (page 152) . On Using the Power Source (page 153) . On Handling Your Computer (page 154) . On Handling Floppy Disks (page 156) . On Handling Discs (page 157) . On Using the Battery Pack (page 158) . On Using Headphones (page 159) . On Handling Memory Stick Media (page 160) . On Handling the Hard Disk (page 161) . On Updating Your Computer (page 162) 152nNPrecautions On Handling the LCD Screen . Do not leave the LCD screen facing the sun. This could damage the LCD screen. Be careful when using your computer near a window. . Do not scratch the LCD screen or exert pressure on it. This could cause a malfunction. . Using your computer in low temperature conditions may produce a residual image on the LCD screen. This is not a malfunction. When the computer returns to normal temperature, the screen returns to normal. . A residual image may appear on the LCD screen if the same image is displayed for a long period of time. The residual image disappears in a while. You can use a screen saver to prevent residual images. . The LCD screen becomes warm during operation. This is normal and does not indicate a malfunction. . The LCD screen is manufactured using high-precision technology. You may, however, see tiny black points and/or bright points (red, blue, or green) that continuously appear on the LCD screen. This is a normal result of the manufacturing process and does not indicate a malfunction. . Avoid rubbing the LCD screen. This could damage the screen. Use a soft, dry cloth to wipe the LCD screen. 153nNPrecautions On Using ...

Herunterladen

Geben Sie zwei Ziffern: