Stimmen - 4, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Toshiba Dateigröße: 2.57 mb Dateiname: Unterrichtssprache:

To double-click, press the primary button twice in rapid succession. The primary button usually corresponds to the left mouse button. The function of the secondary (right-hand) button depends on the program you are using. It usually corresponds to the right mouse button. Check your program’s documentation to find whether it uses the right mouse button. Disabling or enabling the TouchPad The TouchPad is enabled by default. To change the enable/ disable TouchPad setting: 1 Click Start, Control Panel. 2 Click Printers and Other Hardware. 3 Click Mouse or press the Fn + F9 hot keys. The Mouse Properties window appears. 4 Click the TouchPAD ON/OFF tab. The TouchPAD ON/OFF tab view window appears. 5 Select Disable or Enable, whichever is appropriate. 6 Click Apply. 7 Click OK. The Mouse Properties window closes. 8 Close the Printers and Other Hardware window. 9 Close the Control Panel window. NOTE The Fn + F9 shortcut can be used to enable or disable the TouchPad (see “Hot Keys” on page 185). Installing additional memory (optional) Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Stand by or Hibernation mode, data will be lost. Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process large amounts of data. Additional memory comes in various capacities (to stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at accessories.toshiba.com). There are two memory slots. Your system may have both slots occupied. If you use the computer for a long time, the memory modules become hot. If this happens, let the modules cool to room temperature before you replace them. You need a standard Phillips no. 1 screwdriver to install a memory module. To avoid damaging the computer’s screws, use a standard Phillips no. 1 screwdriver that is in good condition. The computer has two memory module slots—Slot A and Slot B. You can install one or two memory modules. If you are adding memory after you have started to use the computer, begin at step 1, otherwise skip to step 2. 1 Turn off the computer via the Start menu. See “Using the Turn off computer or Shut down command” on page 100. The operating system turns off the computer. 2 Unplug and remove any cables connected to the computer. 3 Close the display panel and turn the computer upside down to locate the expansion memory module slot cover. Sample base of a Satellite M30X/M35X series computer 4 Using a standard Phillips no. 1 screwdriver, unscrew the screw that secures the expansion memory module slot cover, then remove the expansion memory module slot cover. Sample removing the expansion mod...

Herunterladen

Geben Sie zwei Ziffern: