Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Toshiba Dateigröße: 3.83 mb Dateiname: Unterrichtssprache:

Carefully remove the battery pack from the computer. . Do not try to disassemble a battery pack. . Do not overcharge or reverse charge a battery. Overcharging will shorten its life, and reverse charging could damage it. . Avoid touching the metal terminals of the battery with another metal object. Short-circuiting the battery can cause it to overheat and may cause damage to the battery or the computer. . Do not incinerate a spent battery, as this could cause it to explode and release caustic liquid. . If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. . To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. . A reverse polarity condition should be avoided with all batteries. The main battery is designed so that it cannot be installed in reverse polarity. . Charge the battery only in the computer or in a battery charger designated as an approved option. . When you install the battery pack, you should hear a click when it is seated properly. . Do not expose the battery pack to fire. The battery pack could explode. Mobile Computing Mobile Computing Disposing of used batteries Maintaining your battery Fully discharging your battery pack will allow better accuracy of the battery meter. To fully discharge your battery pack: . Periodically, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps below: 1 Turn off the computer’s power. 2 Disconnect the AC adaptor and turn on the computer’s power. If it does not turn on, go to step 4. 3 Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the battery light flashes or there is some other warning to indicate a low battery, go to step 4. 4 Connect the AC adaptor to the computer and the power cord/cable to a power outlet. The DC-IN or AC power-light should glow white, and the battery light should glow amber to indicate that the battery pack is being charged. If the DC-IN or AC power-light indicator does not glow, power is not being supplied. Check the connections for the AC adaptor and power cord/cable. 5 Charge the battery pack until the battery light glows white. . If you have extra battery packs, rotate their use. . If you will not be using the system for an extended period, more than one month, remove the battery pack. . If you are not going to use the computer for more than eight hours, disconnect the AC adaptor. . Store spare battery packs in a cool dry place out of direct sunlight. Disposing of used batteries The life of a battery pack depends on usage. When the battery pack needs replacing, the main battery light flashes amber shortly after you have fully recharged the battery. You must discard a battery if it becomes ...

Herunterladen

Geben Sie zwei Ziffern: