Stimmen - 1, Durchschnittliche Bewertung: 5 ( )

Hersteller: Toshiba Dateigröße: 3.83 mb Dateiname: Unterrichtssprache:

Illumination ON/OFF button Play/pause button Mute button Wireless antenna ON/OFF button Volume increase/ decrease button (Sample Illustration) Media control buttons Learning the Basics Learning the Basics Using the optical disc drive The Wireless antenna ON/OFF button allows you to enable/disable the computer’s Wi-Fi® antenna. The Illumination ON/OFF button allows you to set the panel LED and keyboard backlight conditions. The Play/pause button allows you to start playing the disc, or will pause it if currently playing. The Mute button allows you to mute the sound. The Volume increase/decrease button allow you to increase/decrease the volume of the sound coming from the computer. If your computer comes with a solid state drive (SSD) (available on certain models), under certain unusual conditions of prolonged non-use and/or exposure to high temperatures, your SSD may be vulnerable to data retention errors. Inserting an optical disc (slot-type drive) (Available on certain models) To insert an optical disc into the drive: 1 Hold the disc by its edges and check that it is clean and free of dust. Handle DVDs, BDs and CDs carefully, making contact only with the center hole and edge. Do not touch the surface of the disc. Do not stack discs. If you incorrectly handle the discs, you could lose data. If the disc is dusty, clean it as described in “Caring for optical discs” on page 117. 2 With the label facing up, carefully place the disc partially into the slot until the disc stops or the drive starts pulling the disc in. (Sample Illustration) Positioning the disc in the drive 113 Using the optical disc drive Use only standard (12 cm) CD, DVD, or BD Discs. Any other size or shape disc cannot be removed from this slot and may damage the system. Removing a disc (slot-type drive) Do not press the eject button or turn off the computer while the drive in-use indicator light is glowing. Doing so could damage the disk or the drive. NOTE The computer must be powered on to eject a disc. 1 Locate and press the eject button. The disc partially ejects from the slot. 2 Grasp the disc and remove it from the computer, then place the disc in its protective cover. Inserting an optical disc (tray-type drive) (Available on certain models) To insert an optical disc into the drive: 1 Make sure the computer is turned on. The drive will not open if the computer’s power is off. 2 Make sure the drive’s in-use indicator light is off. 3 Press the drive’s eject button. The disc tray slides partially out of the drive. 4 Grasp the tray and pull it fully open. (Sample Illustration) Drive tray fully extended 114 114 5 6 Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in “Caring for optical discs” on page 117. Place the disc carefully in the disc tray, label side up. (Sample Illustration) Positioning the disc in the driv...

Herunterladen

Geben Sie zwei Ziffern: