Login:
Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Anleitung Toshiba, modell Satellite A300-ST4505

Hersteller: Toshiba
Dateigröße: 3.64 mb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Dieses Gerät hat auch andere Anweisungen:

Anleitung Zusammenfassung


Follow these steps to back up your computer or files to optical discs, or a storage drive: NOTE You cannot back up the computer while running on battery power. Connect the AC adaptor before continuing. 1 Prepare your backup target by connecting it and/or inserting a blank optical disc in the drive. 2 Click Start. 3 Click Control Panel. 4 Click System and Maintenance. 5 Click Backup and Restore Center. 6 You can choose to back up some files or the entire computer. Click either Back up files or Back up computer. NOTE If you choose to back up your entire computer, you will be setting up a scheduled backup that will be performed periodically, and will only include the changes made since the last backup. 7 Follow the on-screen help to complete your backup. For more help, click Start, Help and Support, and search for “back up.” If Something Goes Wrong If Something Goes Wrong Develop good computing habits General tips for installing hardware and software Here are a few tips to help ensure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft® Office and Adobe® Photoshop®, or utility software such as special toolbars for your web browser). . Create a Restore Point (refer to “Saving system configuration with Restore Points” on page 189). Before installing anything, use the System Restore utility to set a Restore Point (see the section titled Restore Points). If anything goes wrong, you will then be able to easily restore the Windows® operating system to the state it was in prior to the installation, undoing any changes that the installation process introduced. . Back up your critical data (see “Backing up your data or your entire computer with the Windows® operating system” on page 191). . Have your factory Restore/Reconfiguration CD(s) on hand in case you need any files from them (available on certain models). . Do not guess—follow directions carefully! It is often necessary to run an installation utility first—before connecting a new hardware item to the computer. If the device is connected first, it may be very difficult to complete the installation successfully. Always carefully follow the installation instructions that accompany the hardware or software. . Restart the Windows® operating system. Always restart the Windows® operating system after each installation, even if the installation utility does not prompt you to do so. This will ensure that the installation is completed, and will clean up anything that the installation utility left behind. . Do one installation at a time. If you have several new items to add to your computer system, install just one at a time, creating Restore Points immediately before each successive installation. This will make it much easier to determine the origin of any new problems. For best results, follow this sequence: 1 Back up critical data. 2 Create a Restore Point. 3 Install one item of hardware or software. 4 Restart the Windows® operating system. If Something Goes Wrong If Something Goes Wrong Develop good computing habits 5 Use the new hardware or software for a while, noting any new problems. Make sure that your critical applications (e- mail, business applications, etc.) are working correctly, and verify that important devices are still functioning. 6 For each additional hardware or software item, repeat these steps, starting at step 1 if any of your critical data has changed, or starting at step 2 if no critical data has changed. Cannot use the “USB Sleep and Charge function.” (Available on certain models) . The setting of “USB Sleep and Charge function” may be Disabled. Change the setting to Enabled. . Some external devices may not be able to use the “USB Sleep and Charge function”. In this case, please try one or more of the following methods. . Change the Enabled mode setting. . Turn OFF the computer while external devices are connected. . Connect external devices after turning OFF the computer. If this function cannot be used, change the setting to Disabled. . Make sure that you are connected to a compatible port. The “USB Wakeup function” does not work. . When the “USB Sleep and Charge function” is Enabled in the TOSHIBA Hardware Setup, the “USB Wakeup function” does not work for ports that support the “USB Sleep and Charge function.” In that case, use a USB port that does not have the “USB Sleep and Charge function”-compatible icon ( ), if you have a non-Sleep and Charge USB port available or disable the “USB Sleep and Charge function” in TOSHIBA Hardware Setup. The eSATA device is not recognized from Sleep or Hibernation mode. A connected eSATA device may not be recognized if it is connected to the computer’s eSATA/USB combo port while the computer is in Sleep mode or Hibernation mode. If this occurs, disconnect the eSATA device and then reconnect the device while the computer is turned on. If Something Goes Wrong If Something Goes Wrong If you need furt...

Dieses Handbuch ist für folgende Modelle:
PC Notebooks - Satellite A305-S6833 (3.64 mb)
PC Notebooks - Satellite A305-S6872 (3.64 mb)
PC Notebooks - Satellite A305-S6883 (3.64 mb)
PC Notebooks - Satellite A305-S6894 (3.64 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien