Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Toshiba Dateigröße: 3.3 mb Dateiname: Unterrichtssprache:

Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Standby or Hibernation mode, data will be lost. Getting Started 55 Adding memory (optional) If the computer is on, begin at step 1; otherwise, skip to step 3. 1 Click Start, Turn off (or Shut down - depending on the system). The Turn off computer window appears. 2 Click Turn Off. The operating system turns off the computer. 3 Unplug and remove any cables connected to the computer, including the AC adapter. 4 Remove the battery. For information on removing the battery, see “Changing the main battery” on page 120. 5 Close the display panel and turn the computer upside down to locate the memory module slot cover. Memory module slot cover Front of computer Sample locating the memory module slot cover Using a standard Phillips No. 1 screwdriver, unscrew the screw that secures the memory module slot cover. 56 56 Getting Started Adding memory (optional) Front of computer Sample unscrewing the memory module slot cover 7 Remove the memory slot cover. 8 Place the screw and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its pin connector on the side you insert into the computer. 9 Remove the new memory module from its antistatic packaging. Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. 10 Insert the memory module into the socket on the underside of the computer. Getting Started 57 Adding memory (optional) The socket contains two slots. You can insert the module into NOTE any available slot. 11 Hold the memory module by its edges so that the gold connector bar faces the slot at a slight angle to the socket. clip clip Sample inserting the memory module into the socket 12 Check that the module is inserted completely into the socket and lined up squarely with the socket clips. Sample aligning the module into the socket 58 58 Getting Started Adding memory (optional) 13 Gently press down on the memory module connector until the clips snap into place. Front of computer Memory slots Sample inserting the memory module into the slot Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place. The clips on either side of the memory module snap into place when the memory module is properly inserted. clip clip Sample pressing down on the memory module 14 Replace the memory module slot cover and tighten the screw. 15 Re-insert the battery. For more information on inserting the battery, see “Changing the main battery” on page 120. Getting Started Adding memory (optional) 59 16 17 1...

Herunterladen

Geben Sie zwei Ziffern: