Stimmen - 1, Durchschnittliche Bewertung: 5 ( )

Hersteller: Toshiba Dateigröße: 2.3 mb Dateiname: Unterrichtssprache:

If Something Goes Wrong If Something Goes Wrong Resolving a hardware conflict 2 Click My Computer icon with the secondary button, then click Properties. The System Properties dialog box appears. 3 Click the Hardware tab. 4 Click the Device Manager button. 5 Double-click the category listed as PCMCIA adapter. The operating system displays your PC Card’s Properties dialog box, which contains information about your PC Card configuration and status. The computer stops working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and another device in the system. Use Device Manager to make sure each device has its own I/O base address. See “Fixing a problem with Device Manager” on page 152 for more information. Since all PC Cards share the same socket, each card is not required to have its own address. Hot swapping (removing one PC Card and inserting another without turning the computer off) fails. Follow this procedure before you remove a PC Card: 1 Click the PC Card icon in the system tray. 2 Click Stop xxxx, where xxxx is the identifier for your PC Card. The operating system displays a message that you may safely remove the card. If Something Goes Wrong If Something Goes Wrong Resolving a hardware conflict 3 Remove the card from the slot. Never swap modules when the computer is in Hibernation or Standby mode. This is known as “warm swapping” and is not supported with this computer For more information on Hibernation and Standby modes, see.“Hibernation command” on page 98 and “Stand By command” on page 99 The system does not recognize your PC Card or PCMCIA socket controller. 1 Make sure the computer is not in Standby mode. For more information, see “Using Stand by” on page 103. 2 Turn off the computer. 3 Connect the AC adapter and power cable. 4 Keep the computer plugged in for about three hours with the power turned off. The problem may also be caused by a conflict with any additional memory in your system. Removing a malfunctioning card and reinstalling it can correct many problems. For more information, see “Inserting PC Cards” on page 138. A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section. If Something Goes Wrong If Something Goes Wrong Resolving a hardware conflict Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray. Make sure the USB printer cable is firmly attached to the computer and the printer. Run the printer’s self-test to check for any problem with the printer ...

Herunterladen

Geben Sie zwei Ziffern: