Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Samsung Dateigröße: 3.4 mb Dateiname: Unterrichtssprache:

Front/RightViewofPC 4 UsersManual PC Card Slot Modem Port Security Lock Port DC-in Port LAN/Serial Port USB Port Security Lock Port DC-in Port LAN/Serial Port USB Port Figure3. Back/LeftViewofPC The figure below is the bottom view of the PC without the Docking Station attached. Battery Docking Connector Battery Latch Memory Module Compartment Battery Latch Figure4. BottomViewofPC IntroducingYourComputer 5 Docking Station Equipment Location The figures in this section show you the location of important items on the docking station. See “Using the Multi-Bays in the Docking Station” on page 33. 5.25" Multi-Bay Docking Pins 3.5" Multi-Bay Release Latch Docking Release Lever Release Latch Docking Connector Eject PC Button 5.25 Multi-Bay (CD/DVD Drive installed) 3.5 Multi-Bay (FDD installed) Figure5. DockingStationFront/Right/Top Security Lock Port (Composite) TV-Out Port PS/2 Port USB Port USB Port LAN Port DC-in Port Speaker Docking Release Lever Printer Port Docking Hook Docking Hook Figure6. DockingStationTop/Back/Left 6 UsersManual Speaker 5.25" Multi-Bay Disk Drive Speaker 5.25" Multi-Bay Disk Drive (CD/DVD-ROM Drive) 3.5" Multi-Bay Disk Drive (FDD Drive) Figure7. DockingStationBottom Docking/Undocking your Computer The docking station allows you to use this system as a desktop PC. Connect the AC adapter to the docking station when it is installed to the computer. Docking your Computer You may dock your computer while the computer is off or on, however the preferred and safer method is with the power off. To install your computer into the docking station with the power off, complete the following steps: 1. Disconnect the AC adapter from the system. 2. Place the front part of a system on two hooks of the docking station. 3. Press the back part of a system until it clicks into the docking station fully. IntroducingYourComputer 7 8 Users Manual Figure 8. Docking Sequence To dock your computer with the power on simply place the computer on the docking hooks and press down on the area above the keyboard. Dock Change When the docking station is connected properly then the "Dock Change" message shows.When the "Dock Change" message disappears you may use the system. Press the system on both sides not the middle to ensure that the docking connector is completely mated to the system. Undocking your Computer To remove your computer from the docking station with the power off, complete the following steps. 1. Turn off the system. 2. Disconnect the AC adapter. 3. Grab the two docking release levers and pull themout until they click. The computer will pop up approximately 1cm. 4. Tilt the system up at the back. Front of the System Back of the System Docking Hook Figure9. DockingStationReleaseLeverOperation 5. After tilting remove the system by sliding/lifting out toward the back of the docking station. 6. Connect the AC adapter to the system. To remove your computer from the docking station with the power on, complete the following steps: 1. Press the Eject PC button on front of the docking station for one second. 2. When “Dock Change” message shows on the screen, pull the two release levers outward until they click and the computer pops up approximately 1cm. 3. Remove the system. 4. Attach the AC adapter to the system. Eject PC Button Figure 10. Undocking Computer (Power On) Do not detach the computer if battery power is less than 20% power. The system may crash and you will lose any unsaved data. Use Start > Eject PC instead of the Eject PC button if the "Eject PC Button" does not work and the dock change message is not displayed. IntroducingYourComputer 9 Using Your Computer for the First Time This section gives you detailed information on using your computer for the first time. Installing the Battery The first step in using your notebook computer is to determine the normal use for your computer. Two batteries (Standard and Long Life) come with the computer and both go into the same slot. The standard battery may be used whether the computer is in the docking station or not. the long life battery may only be used when the PC is not in the docking station. Ensure that both battery latches are slid fully toward the center of the computer. The long life battery cannot be used with the PC in the docking station. 1 2 Long Life Battery Standard Battery or 10 UsersManual AC Adapter Your computer runs on power from the battery in the computer or from an electrical outlet. The first time that you use your computer, fully charge the battery using the AC adapter, see Figure 11. To attach the power cord complete the following: Power Cords: Many countries have different power cord configurations. Your computer should be supplied with the correct one for your area. If not contact the supplier. 1. Plug the AC adapter into the power connector on the back side of the computer. 2. Connect the power cord to the AC adapter and then to an electrical outlet. Power Connector Power Cord AC Adapter DC-in Port Figure11. ConnectingtheACAdapter...

Herunterladen

Geben Sie zwei Ziffern: