Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
The noise canceling effect is not sufficient
Mass
Approx. 330 g (without cord)
How to use/Mode d’utilisation/Utilización
– The noise canceling function is effective in low frequency
Talk microphone Open circuit voltage level (Inline remote
ranges such as airplanes, trains, or offices (near air-
and microphone cord for iPod/iPhone/iPad)
Charging the headphones/Chargement du casque/Cómo cargar los auriculares
conditioning, etc.) and is not as effective for higher
–42 dB (0 dB = 1 V/Pa)
1
frequencies, such as human voices.
Headphones charging and usage time
– Turn on the headphones.
Approx. charging hours Approx. usage hours 3)
Distorted sound
4 hours 4)
22 hours 5)
– Turn down the volume of the connected equipment.
– Recharge the headphones.
L indication
R indication
Included items
Indication L
Indication R
Indicación L
Micro-USB cable
Power does not turn on or the headphones
Headphones (1)
Indicación R
Micro-câble USB
do not operate properly
Connecting cord (1.5 m cord, using PCOCC, gold-plated
Cable micro USB
–
L-shaped stereo mini plug) (1)
Recharge the headphones.
Charging indicator
Inline remote and microphone cord for iPod/iPhone/iPad
If the power does not turn on, even after charging the
Operating Instructions
Témoin de charge
(1.2 m cord, using PCOCC, four-conductor gold plated L-
GB
headphones, the rechargeable battery may be damaged.
Noise Canceling
Indicador de carga
shaped stereo mini plug) (1)
In this case, consult your place of purchase or a Sony
Micro-USB cable (1.5 m) (1)
dealer.
Mode d’emploi
Plug adaptor for in-flight use 6) (single/dual) (1)
Headphones
FR
Charging cannot be done
Carrying case (1)
Operating Instructions (1)
Connecting/Raccordement/Conexión
– Check that the charging indicator is lights up.
Manual de instrucciones
Warranty card (1)
ES
Connect the headphones and the micro-USB cable
2
Digital music player, etc.
iPod/iPhone/iPad
securely.
Recommended accessory (sold separately) 7)
Lecteur musical numérique, etc.
iPod/iPhone/iPad
– Check that the micro-USB cable and the computer are
Reproductor de música digital, etc.
iPod/iPhone/iPad
USB AC Adaptor: AC-UD10
firmly connected.
– Check that the micro-USB cable and the computer are
1) Under the Sony measurement standard.
directly connected; not via a USB hub.
2) Equivalent to approx. 99.7% reduction of energy of sound
– Check the system requirements for a computer that can
compared with not wearing headphones.
charge the battery using USB.
3) At 1 kHz, sound pressure level 90 dB output
– Check that the computer is turned on.
4) Hours required to fully charge an empty battery
for dual jacks
for stereo mini jack
– Check that the computer is not in standby, sleep or
5) Time stated above may vary, depending on the
Tactile dot (on the left)
pour prises doubles
pour mini-prise stéréo
hibernation mode.
temperature or conditions of use.
Point tactile (à gauche)
para tomas duales
para minitoma estéreo
– If the charging indicator blinks (blinking patterns: about 30
6) May not be compatible with some in-flight entertainment
Punto táctil (en el lado
Connecting cord
seconds on and 3 seconds off), you are using an adaptor
services.
izquierdo)
Cordon de raccordement
other than the recommended one. Use a USB AC Adaptor
7) Availability depends on the country.
Cable de conexión
specified in “Recommended accessory (sold separately)”.
– If the charging indicator blinks, the headphones may be
Design and specifications are subject to change without
Inline remote and microphone cord for iPod/iPhone/iPad
malfunctioning. Disconnect the unit from the connected
notice.
Cordon du micro et distant en série pour iPod/iPhone/iPad
device, and consult your place of purchase, or a Sony
Remoto en línea y cable de micrófono para iPod/iPhone/iPad
dealer.
Compatible iPod/
The unit cannot be recognized by a
Turning on the power/Mise sous tension/Encendido
After use
computer
iPhone/iPad models
3
4 Wearing and controlling/Port et contrôles/
Colocación y control
Turn off the power of the headphones
– Check that the micro-USB cable and the computer are
Après utilisation
firmly connected.
You can use the headphones with only the following models
Volume+
Éteignez le casque
Volume+
– Disconnect the micro-USB cable from the computer and
supporting remote control. Update your iPod, iPhone or
Volumen+
connect again.
iPad to the latest software before use. In the Operating
Después del uso
Apague los auriculares
– Check that the micro-USB cable and the computer are
Instructions, iPod, iPhone and iPad are collectively described
Center button
Microphone
directly connected; not via a USB hub.
as “iPod” except in special cases.
Bouton central
Micro
– There may be a problem with the connected USB port
– iPod touch (4th generation)
Botón central
Micrófono
of the computer. Connect to another USB port if it is
– iPod touch (3rd generation)
Volume–
available.
– iPod touch (2nd generation)
Volume–
– Try the USB connection procedure again in cases other
– iPod nano (6th generation)
Volumen–
than those stated above.
– iPod nano (5th generation)
– iPod nano (4th generation)
MDR-1RNC
No operation works
– iPod classic 120GB 160GB (2009)
–
– iPod shuffle (4th generation)
Set the POWER switch of the headphones to “OFF”,
– iPod shuffle (3rd generation)
confirm the connections, and then set the POWER switch
– iPhone 4S
back to “ON”.
–
– iPhone 4
Reset the headphones.
– iPhone 3GS
© 2012 Sony Corporation Printed in Malaysia
– The noise canceling function works for noise in the low
– Be sure to consult a Sony dealer when the earpads
Insert a small pin, etc. into the RESET button on the left
Checking the charging
Automatic AI Noise
frequency band primarily. Although noise is reduced, it is
become dirty or damaged, or when the headphones
– iPad (3rd generation)
housing, and press until the button slightly rebounds.
– iPad 2
(1)
not canceled completely.
require repair work.
– The noise canceling effect may not be pronounced in a
– Do not leave the headphones in a location subject to
The connected iPod does not work
– iPad
4-434-825-51(1)
status
Canceling
very quiet environment, or some noise may be heard.
direct sunlight, heat or moisture.
– Check if the cord is connected correctly. Connect
On copyright
– When you use the headphones in a train or a car, noise
– Do not subject the headphones to excessive shock.
English
Noise Canceling Headphones
Disposal of waste batteries
The Automatic AI Noise Canceling function constantly
the L type plug to the iPod and the other plug to the
Status
Charging indicator
iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and
analyzes environmental ambient sound components and
may occur depending on street conditions.
– Handle the driver units carefully.
headphones.
WARNING
(applicable in the European Union
Charging
On
– Howling may occur if you do not wear the headphones
– If you feel drowsy or sick while using this headphones,
iPod touch are trademarks of Apple Inc., registered in the
and other European countries with
automatically selects the most effective noise canceling
U.S. and other countries.
Full
Off
mode.
correctly.
stop use immediately.
“Made for iPod”, “Made for iPhone”, and “Made for iPad” mean
Do not expose the battery to excessive heat such as direct
separate collection systems)
– Howling may occur if you place an object such as finger
Charging malfunction Blinks
Notes on headphones
Features
that an electronic accessory has been designed to connect
sunlight, fire or the like.
Noise canceling mode types
close to inside of the headphones. Keep it away from the
This symbol on the battery or on the packaging indicates
headphones.
High volume may affect your hearing. For traffic
specifically to iPod, iPhone, or iPad, respectively, and has
Excessive sound pressure from earphones and headphones
that the battery provided with this product shall not be
NC Mode A: Noise mainly in an airplane is effectively
–
– Digital Noise Canceling with Dual Noise Sensor
Mobile phones may cause interference and noise. Should
safety, do not use while driving or cycling.
been certified by the developer to meet Apple performance
can cause hearing loss.
treated as household waste.
Using the Center button
reduced.
Technology
this occur, locate the headphones further away from the
standards. Apple is not responsible for the operation of this
NC Mode B: Noise mainly in a bus or a train is effectively
Microphones both inside and outside the housings are
Notice for customers: the following
On certain batteries this symbol might be used in
mobile phone.
device or its compliance with safety and regulatory standards.
combination with a chemical symbol. The chemical symbols
reduced.
combined with digital noise canceling software engine to
information is only applicable to equipment
for mercury (Hg) or lead (Pb) are added if the battery
(Inline remote and
NC Mode C: Noise mainly found in an office environment
Notes on using on the airplane
As headphones reduce outside sounds, they may cause a
deliver significant noise canceling performance.
sold in countries applying EU directives
contains more than 0.0005% mercury or 0.004% lead.
(PC, copier, air ventilation, etc.) is effectively
traffic accident. Also, avoid listening with your headphones
– Automatic AI (Artificial Intelligence) Noise Canceling
System requirements
By ensuring these batteries are disposed of correctly, you
reduced.
Do not use the headphones when use of electronic
in situations where hearing must not be impaired, for
function.
Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku
microphone cord for
will help prevent potentially negative consequences for
equipment is prohibited or when use of personal
example, a railroad crossing, a construction site, etc.
Automatic selection of the optimal noise canceling mode
Tokyo, 108-0075 Japan
for battery charge using
the environment and human health which could otherwise
Tips
headphones for in-flight entertainment services is
based on intelligent analysis of environmental ambient
For EU product compliance: Sony Deutschland GmbH,
iPod/iPhone/iPad)
be caused by inappropriate waste handling of the battery.
prohibited.
Preventing hearing damage
noise.
Hedelfinger Strasse 61, 70327 Stuttgart, Germany
– When the headphones are turned on, NC Mode A is set.
The recycling of the materials will help to conserve natural
–
Avoid using headphones at high volume. Hearing experts
It may take a few seconds to analyze the environmental
USB
Notes on charging the headphones
– Digital Equalizer and full digital S-Master amplifier
advise against continuous, loud and extended play. If you
Disposal of Old Electrical &
resources.
Operation
Explanation
ambient sound.
Delivers ideal frequency response and high-quality music
– Charge the headphones using the supplied micro-USB
experience a ringing in your ears, reduce the volume or
reproduction with full digital processing.
Personal Computer with pre-installed with any of the
Electronic Equipment (Applicable
In case of products that for safety, performance or data
Single press
Plays/pauses a track of the
integrity reasons require a permanent connection with an
connected iPod.
cable. Otherwise, it may cause a malfunction.
discontinue use.
– DSEE
following operating systems and USB port:
in the European Union and other
incorporated battery, this battery should be replaced by
Double press
Skips to the next track.
Notes on use
– Charge in an environmental temperature of between 5°C
Note on static electricity
Offers natural sound with a spacious feel by restoring
Operating Systems
European countries with separate
qualified service staff only.
and 40°C. Otherwise, the battery may not fully charge.
Triple press
Skips to the previous track.
high-frequency range sound and the tail shape of the
– If you haven’t used the headphones for a long time,
In particularly dry air conditions, noise or sound skipping
collection systems)
To ensure that the battery will be treated properly, hand
waveform likely to be removed through the audio
– When using Windows®
over the product at end-of-life to the applicable collection
Long press
Starts the “VoiceOver*” feature (if
What is noise canceling?
the life of the rechargeable battery may become short.
may occur, or mild tingling may be felt on your ears. This is a
compression process.
Windows® 7
This symbol on the product or on its packaging indicates
point for the recycling of electrical and electronic
available).
The noise canceling circuit actually senses outside noise
This will improve when you repeat the charging and
result of static electricity accumulated in the body, and not a
– Up to 22 hours of listening time
(Home Premium / Professional / Ultimate / Starter)
that this product shall not be treated as household
equipment.
Press once when call is Answers the call.
with built-in microphones and sends an equal-but-opposite
discharging process several times.
malfunction of the headphones.
– Passive operation
(including 64 bit version)
waste. Instead it shall be handed over to the applicable
For all other batteries, please view the section on how
incoming
canceling signal to the headphones.
– Do not store the headphones in hot places for a long time.
The effect can be minimized by wearing clothes made from
Allows audio listening even when the headphones power
Windows Vista® (Service Pack 2 or later)
collection point for the recycling of electrical and electronic
to remove the battery from the product safely. Hand the
Press again
Ends the call.
When storing it for more than a year, charge the battery
natural materials.
is turned off.
(Home Basic / Home Premium / Business / Ultimate)
equipment. By ensuring this product is disposed of correctly,
battery over to the applicable collection point for the
Hold down for about
Rejects an incoming call (two
Notes on the noise canceling function
once a year to prevent over discharge.
– Detachable cord
(including 64 bit version)
you will help prevent potential negative consequences for
If you have any questions or problems concerning the
recycling of waste batteries.
two seconds and
low beeps confirm the call was
– Adjust the earpads so that they cover your ears, otherwise
– For system requirements for a computer that can charge
3.5 mm connecting cord, and inline remote and
Windows® XP (Service Pack 3 or later)
the environment and human health, which could otherwise
system that are not covered in this manual, please consult
For more detailed information about recycling of this
release
rejected).
noise canceling will not function properly.
the battery using USB, see “System requirements for
microphone cord for iPod/iPhone/iPad
(Home Edition / Professional / Media Center Edition 2004 /
be caused by inappropriate waste handling of this product.
the nearest Sony dealer.
product or battery, please contact your local Civic Office,
– The noise canceling effect may vary depending on how
battery charge using USB”.
Media Center Edition 2005)
The recycling of materials will help to conserve natural
your household waste disposal service or the shop where
* Availability of the “VoiceOver” feature depends on iPod
you wear the headphones.
– If you recharge the headphones by connecting to an AC
resources. For more detailed information about recycling
– When using Macintosh
you purchased the product.
and its software version.
– Do not cover the microphone of the headphones with
outlet, use the separately-sold USB AC Adaptor specific in
of this product, please contact your local Civic Office, your
Specifications
Mac OS X (version.10.5 or later)
your hands. The noise canceling function may not work
“Recommended accessory (sold separately)”. For details,
Troubleshooting
household waste disposal service or the shop where you
Note
properly.
refer to the operating instructions supplied with the
Windows and Windows Vista are registered trademarks or
purchased the product.
Checking the remaining
General
Be careful not to unintentionally press any buttons when
adaptor.
No sound
trademarks of Microsoft Corporation in the United States
you carry your iPod with this headphones connected.
– If the headphones are malfunctioning, charging will not
Type
Closed, dynamic
and/or other countries.
battery
start and the charging indicator will blink. In this case,
– Recharge the headphones. You can use the headphones
Driver units
50 mm, dome type
Macintosh and Mac OS are trademarks of Apple Inc.,
disconnect the unit from the connected device, and
while charging.
Power handling capacity
registered in the U.S. and other countries.
consult your place of purchase, or a Sony dealer.
You can listen to the music using the headphones even
100 mW
Status
POWER Indicator
Beep sound
when the POWER switch is set to “OFF”. In this case, the
Notes on handling
Impedance
52 Ω at 1 kHz (when the power is on)
noise canceling function, Digital Equalizer, S-Master and
Full
Blinks 3 times *
No beep
16 Ω at 1 kHz (when the power is off)
– Because the headphones are designed to fit closely in your
DSEE are not active, and the headphones operate as
Sensitivity
103 dB/mW (when the power is on)
Blinks 2 times *
No beep
ears, forcing them against your ears may result in eardrum
passive headphones.
100 dB/mW (when the power is off)
Low
Blinks 1 time *
No beep
damage. Avoid using the headphones where they are
– Check that the rechargeable battery is not depleted.
Frequency response
Empty
Blinks quickly
Long beep
liable to be struck by people or other objects, such as a
– Check the connection of the headphones and the
5 Hz – 24,000 Hz
(30 seconds)
(2 seconds)
ball, etc.
equipment.
Total Noise Suppression Ratio 1)
– Pressing the headphones against your ears may produce a
– Check that the connected equipment is turned on.
Approx. 25 dB 2)
* When turning off the power of the headphones.
Microphone
diaphragm click sound. This is not a malfunction.
– Turn up the volume of the connected equipment.
Power source
DC 3.7 V Built-in lithium-ion rechargeable
– After you turn on the power of the headphones, you may
– Clean the headphones with a soft dry cloth.
battery or DC 5 V USB
hear a slight hiss. This is the operating sound of the noise
– Do not leave the plug dirty otherwise the sound may be
Current consumption
canceling function, not a malfunction.
distorted.
500 mA
MDR-1RNC [GB, FR, ES] 4-434-825-51(1)
...