Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Connect the L type plug to the iPod and the other plug to the headphones. Features Digital Noise Canceling with Dual Noise Sensor Technology Microphones both inside and outside the housings are combined with digital noise canceling software engine to deliver significant noise canceling performance. Automatic AI (Artificial Intelligence) Noise Canceling function. Automatic selection of the optimal noise canceling mode based on intelligent analysis of environmental ambient noise. Digital Equalizer and full digital S-Master amplifier Delivers ideal frequency response and high-quality music reproduction with full digital processing. DSEE Offers natural sound with a spacious feel by restoring high-frequency range sound and the tail shape of the waveform likely to be removed through the audio compression process. Up to 22 hours of listening time Passive operation Allows audio listening even when the headphones power is turned off. Detachable cord Specifications General Type Closed, dynamic Driver units 50 mm, dome type Power handling capacity 100 mW Impedance 51 . at 1 kHz (when the power is on) 19 . at 1 kHz (when the power is off) Sensitivity 103 dB/mW (when the power is on) 100 dB/mW (when the power is off) Frequency response 5 Hz – 24,000 Hz Total Noise Suppression Ratio 1) Approx. 25 dB 2) Power source DC 3.7 V Built-in lithium-ion rechargeable battery or DC 5 V USB Current consumption 500 mA Mass Approx. 330 g (without cord) Talk microphone Open circuit voltage level (Inline remote and microphone cord for iPod/iPhone/iPad) –42 dB (0 dB = 1 V/Pa) Headphones charging and usage time Approx. charging hours Approx. usage hours 3) 4 hours 4) 22 hours 5) –– – – – – – –– – – – – – – – – – – – – – – –– – Included items Headphones (1) Inline remote and microphone cord for iPod/iPhone/iPad (1.2 m cord, using PCOCC, four-conductor gold plated L- shaped stereo mini plug) (1) Micro-USB cable (1.5 m) (1) Carrying case (1) Operating Instructions (1) Warranty card (1) Recommended accessory (sold separately) 6) USB AC Adaptor: AC-UD10 1) Under the Sony measurement standard. 2) Equivalent to approx. 99.7% reduction of energy of sound compared with not wearing headphones. 3) At 1 kHz, 0.1 mW + 0.1 mW output 4) Hours required to fully charge an empty battery 5) Time stated above may vary, depending on the temperature or conditions of use. 6) Availability depends on the country. Design and specifications are subject to change without notice. Compatible iPod/ iPhone/iPad models You can use the headphones with only the following models supporting remote control. Update your iPod, iPhone or iPad to the latest software before use. In the Operating Instructions, iPod, iPhone and iPad are collectively described as “iPod” except in special cases. iPod touch (4th generation) iPod touch (3rd generation) iPod touch (2nd generation) iPod nano (6th generation) iPod nano (5th generation) iPod nano (4th generation) iPod classi...