Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Hersteller: Azden Dateigröße: 165.3 kb Dateiname: 325_SYSTEM_instructions.pdf Unterrichtssprache:

Input level RF Power Input Impedance Audio Adjust. Range Battery Dimensions Weight UHF 188 Selectable Frequencies (566.125-589.875MHz) Dual-channel ReceiverPLL Synthesized-95dBm 50Hz – 15kHz >57dB (±5kHz) “A” Weighted MIC Level – unbalanced – 3.5mm Mini-Jack -64 dBm – 600 ohms @ ± 5kHz deviation -28 dBm – 600 ohms @ ± 40kHz deviation 2 “AA” Alkaline (2 x 1.5V) - 3-4 hours runtime 2 “AA” rechargeable Ni-MH (2 x 1.2V) 6VDC @ 0.5A 2.87"W x 4.45"H x 1.59"D (73 x 113 x 40.5 mm) Approx. 10.2oz (290g) w/batteries UHF 188 Selectable Frequencies (566.125-589.875MHz) PLL Synthesized25mW 50Hz – 15kHz ±40kHz @ 1kHz Modulation, MIC Input – 11dBm 2 “AA” Alkaline (2 x 1.5V) – 6-8 hours runtime 2 “AA” rechargeable Ni-MH(2 x 1.2V) 2.52"W x 3.93"H x 1.106"D (64 x 100 x 27 mm) Approx. 6oz (170g) w/batteries UHF 188 Selectable Frequencies (566.125-589.875MHz) Internal -16dBm25mW 25k ohms -65dBm to 46dBm 2 “AA” Alkaline (2 x 1.5V) – 6-8 hours runtime 2 “AA” rechargeable Ni-MH(2 x 1.2V) 1.57"W x 1.57"H x 4.49"L (40 x 40 x 114 mm) Approx. 6.35oz (180g) w/battery 35HT Handheld Microphone/Transmitter Frequency Range Oscillator RF Power Frequency Response Max. Deviation Batteries Dimensions Weight UHF 188 Selectable Frequencies (566.125-589.875MHz) PLL Synthesized25mW 50Hz – 15kHz ±40kHz @ 1kHz Modulation, MIC Input – 65dBm (dev ±5kHz) 2 “AA” Alkaline (2 x 1.5V) – 8-10 hours runtime 2 “AA” rechargeable Ni-MH (2 x 1.2V) .1.89" x 9.2"L (48 x 234.5 mm) Approx. 9.5oz (270g) w/batteries Due to constant improvements, specifications are subject to change without notice. Azden Corporation, 147 New Hyde Park Road, P.O. Box 10, Franklin Square, NY 11010 tel - 516.328.7500 • fax - 516.328.7506 • email - azdenus@azdencorp.com © 2008 Azden Corporation Printed in USA P1070-03 325 SYSTEM User’s Guide 325UPR • 35BT • 35HT • 35XT DUAL-CHANNEL ON-CAMERA UHF WIRELESS MICROPHONE SYSTEM 13 10 Belt Clip 16 1 7 2 5 4 3 6 8 9 17 18 19 20 21 11 12 24 25 26 23 27 + -+ - 15 14 22 24 28 13 10 Belt Clip 16 1 7 2 5 4 3 6 8 9 17 18 19 20 21 11 12 24 25 26 23 27 + -+ - 15 14 22 24 28 (27) POWER: Switches the transmitter “ON” or “OFF”. (28) LCD Display: This display shows the following information: TV:Transmit Channel Number: 30:01 – 33:47 Battery Condition: Using a 3 step indicator - 1 (Low) to 3 (High) To change the TV:Transmit channel number: Use the tip of the tool provided and press the UP or DOWN button to the desired channel, number appears (refer to the included chart). Once the desired TV:Transmit channel number has been selected on the transmitter, set the receiver to the same number. The TV:Transmit channel display is made of two parts. The first number is the actual TV channel (30-33) and the second is the “transmit channel” number (01-47). Operating the system: Because this is a frequency agile system, the receiver and transmittersmust be on the same channel number. To change the channel number, use the tip of the providedtool and press the UP or DOWN button to the desired channel. Make sure...

Herunterladen

Geben Sie zwei Ziffern: