Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Azden Dateigröße: 165.3 kb Dateiname: Unterrichtssprache:

Ch.1 is on the “Tip” while Ch.2 in on the “Ring”. (5) LCD Display: The twin LCD display will light up when the power is turned “ON”. The LCD displays show the following information. TV:Receive Channel Number: 30:01 – 33:47 Battery Condition: Using a 3-step indicator - 1 (Low) to 3 (High) Reception Level: Using a 4-step indicator - 1 (Low) to 4 (High) To change the TV:Receive channel number, use the tip of the tool provided and press the UP or DOWN button until the desired channel number appears (refer to included chart). Once the desired TV:Receive channel number has been selected on the receiver, set the transmitter to the same number. The TV:Receive channel display is made of two parts. The first number is the actual TV channel (30-33) and the second is the “receive channel” number (01-47) 1 Note: When using two transmitters with the 325UPR please do the following: A) Make sure that you use 2 different channel numbers that are at least 10 numbers apart. This will prevent possible crosstalk between the 2 channels being used. For example: If you use TV:Receive channel number 30:10 for one transmitter, use channel number 30:20 for the other transmitter. The 2 channels on the receiver must also be set on the numbers 30:10 and 30:20. B) The system will operate properly if both transmitters are in close proximity to each other, however make sure that both transmitters are at least 10 feet away from the receiver, this will prevent the frequencies from overlapping. (6) PHONE jack: Plug a stereo headphone into this jack to monitor sound - Ch. 1 will be heard on the left, Ch. 2 on the right. (7) DC 6 Volt Input: An optional charger/power supply and rechargeable batteries are available for the 325UPR. For additional information or to order these products please visit the Azden website at or contact your Azden dealer. NOTE: Using a power supply of the wrong voltage/current may damage the unit and void the warranty. (8) Shoe Stand: Attach the 325UPR to the shoe-mount of the video camera by sliding it into place. Turn the thumbwheel clockwise to tighten. Reverse this procedure to remove the 325UPR from the camera. (9) Antennas: For best reception the antennas should be pointed in an upward fashion. Use caution, and do not force them into this position. BODYPACK TRANSMITTER (35BT) (10) Remove the battery compartment lid by sliding it down. (11) Insert two fresh “AA” Alkaline batteries* into the compartment. Make sure the battery polarity is correct as marked inside the battery compartment. In addition to the battery, inside the battery compartment you will find: (12) MIC Input LEVEL Control: This control enables you to adjust the input level of the microphone. Using the supplied tool, turn the dial clockwise to increase, or counterclockwise to decrease the input level. (13) POWER: Switches the transmitter “ON” or “OFF”. (14) MIC Input Jack Plug the supplied EX-503L microphone into the MIC input jack and tighten the collar until snug (DO NOT ...

Herunterladen

Geben Sie zwei Ziffern: