Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
SAVE THESE INSTRUCTIONS NOTE: Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use. Contact Carrier/ Dealer for further instruction. SAFETY SUMMARY The following recommendations are for the safe use of the 50 PSI Compressor: WARNINGS “Caution: Federal law restricts this device to sale by or on order of a physician, or any other practitioner licensed by the law of the State in which he practices to use or order the use of this device.” DO NOT USE WITHOUT FIRST READING AND UNDERSTANDING THESE INSTRUCTIONS. IF YOU ARE UNABLE TO UNDERSTAND THE WARNINGS AND INSTRUCTIONS, CONTACT INVACARE TECHNICAL SERVICES (800- 832-4707) BEFORE PERFORMING THIS INSTALLATION. IMPROPER USE MAY CAUSE PERSONAL INJURY AND/OR EQUIPMENT DAMAGE. SPECIFIC WARNINGS TO REDUCE THE RISK OF ELECTRICAL SHOCK OR INJURY TO PERSONS DO NOT disassemble. Disassembly or attempted repairs if accomplished incorrectly can create electrical shock hazard. Only qualified technicians should perform servicing of this compressor unit. If this unit is supplied with a three-pronged plug, connect unit to a properly grounded outlet only. Improper use of the grounding plug can result in a risk of electric shock. TO REDUCE THE RISK OF ELECTROCUTION, EXPLOSION OR FIRE This product should NEVER be left unattended when plugged in. ALWAYS unplug this product IMMEDIATELY after using and store in a dry place. DO NOT use this product where it can fall or be pulled into water or other liquid. DO NOT reach for product if it has fallen into liquid. UNPLUG IMMEDIATELY. SPECIFIC WARNINGS CONTINUED DO NOT pump anything other than atmospheric air. NEVER operate this product outdoors in the rain or in a wet area. DO NOT use this product near flames. DO NOT use the compressor for continuous operation more than 10 hours, this can result in overheating and damage to the compressor. NEVER operate this product if it has a damaged cord or plug. If it is not working properly, if it has been dropped or damaged, or if it has fallen into water, return the product to a service center for examination and repair. DO NOT use this product in or near explosive atmospheres or where aerosol (spray) products are being used. DO NOT pump combustible liquids or vapors with this product or use in or near an area where flammable or explosive liquids or vapors may exist. Close supervision is necessary when this product is used near children. NEVER allow children to operate the unit. Keep the cord away from HEATED surfaces. NEVER block any air openings (inlet) of the product or place it on a soft surface where the opening may be blocked. Keep all air openings free of lint, dirt and other foreign objects. NEVER use while sleepy or drowsy. NEVER drop or insert fingers or any other object into any openings. DO NOT operate this product in an oxygen enriched environment, i.e. oxygen tent or oxygen hood. This unit may be thermally protected and can automatically restart when the protector resets. Always disconnect power source before servicing. Use only in well ventilated areas. All electrical products generate heat. To avoid serious burns NEVER touch unit during or immediately after operation. CAUTION Compressors are precision-made and carefully assembled and wired. Therefore DO NOT disassemble or attempt to repair these products. Only qualified personnel should perform repair service. 1 REGULATORY LISTING IN COMPLIANCE WITH: UL 544 - Listed Medical and Dental Equipment CSA C22.2 No. 125 - Certified Medical and Dental Equipment GROUNDING INSTRUCTIONS (FIGURE 1) WARNING Improper use of the grounding plug can result in a risk of electric shock. NOTE: This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electrical shock by providing an escape wire for the electrical current. This product is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. NOTE: If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal. The wire with insulation having an outer surface that is green with or without yellow strips is the grounding wire. NOTE: This product is for use on a nominal 120 V circuit, and has a grounding plug that looks like the plug illustration in SKETCH A of FIGURE 1. A temporary adapter, which looks like the adapter illustrated in SKETCHES B and C, may be used to connect this plug to 2-pole receptacle as shown in SKETCH B if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (SKETCH A) can be installed by a qualified electrician. The green colored rigid ear, lug and the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by the screw. NOTE: Check with a qualified electrician or serviceman if the...