Stimmen - 5, Durchschnittliche Bewertung: 4.2 ( )

Hersteller: John Deere Dateigröße: 2.96 mb Dateiname: 37_1053.pdf Unterrichtssprache:

Do not operate air compressor in a corrosive environment. Always operate the air compressor in a stable, secure position to prevent air compressor from falling. Follow all maintenance instructions listed in this manual. RISK FROM NEGLIGENCE RISK OF AIR COMPRESSOR DAMAGE ! SAVE THESE INSTRUCTIONS ! GASOLINE AIR COMPRESSOR FEATURES (SINGLE STAGE) AM1-PM06-08J_JC FEATURES 070610-CAW ITEM DESCRIPTION 1 DECAL - MUFFLER HOT 2 ENGINE - 49 STATE 3 DECAL - CAUTION: RISK OF FIRE 4 ENGINE SWITCH 5 THROTTLE CONTROL 6 OIL FILL PORT 7 PUMP DISCHARGE LINE 8 PILOT VALVE 9 DECAL - WARNING: HOT 10 OIL SIGHT GLASS 11 PUMP OIL DRAIN 12 DECAL: CAUTION/WARNING/DANGER ITEM DESCRIPTION 13 DECAL - WARNING: RISK OF INJURY 14 TANK DRAIN VALVES 15 PRESSURE RELIEF VALVE 16 PRESSURE GAUGE - TANK PSI 17 PRESSURE GAUGE - OUTLET PSI 18 OUTLET FITTING 19 PRESSURE REGULATOR 20 PUMP 21 VENTILATION OPENINGS 22 BELTGUARD 23 AIR FILTER EXPLODED VIEW & EXPLANATION OF AIR COMPRESSOR FEATURES SAFETY RELIEF VALVE: This valve is designed to prevent system failures by relieving pressure from the system when the compressed air reaches a predetermined level. The valve is preset by the manufacturer and must not be modified in any way. To verify the valve is working properly, pull on the ring. Air pressure should escape. When the ring is released, it will reseat. PILOT VALVE: When the toggle is in the horizontal position, all air from the air compressor is vented through the discharge muffler. This gives an easy start feature. For normal operation, the toggle is in the vertical position. AIR INTAKE FILTER: This filter is designed to clean air coming into the pump. To ensure the pump continually receives a clean, cool, dry air supply this filter must always be clean and ventilation opening free from obstructions. Replace filter element when necessary. OIL FILL PORT/VENT: Pour oil into the Oil Fill Port/Vent when required. OIL SIGHT GLASS: The Oil Sight Glass displays the oil level in the pump. The oil level should be at the center of the Oil Sight Glass. If low, add SAE 30W non-detergent oil. AIR COMPRESSOR PUMP: To compress air, the pistons move up and down in the cylinders. On the downstroke, air is drawn in through the air intake valves while the exhaust valves remain closed. On the upstroke, air is compressed, the intake valves close and compressed air is forced out through the exhaust valves, into the discharge line, through the pilot valve and into the air tank. AIR TANK PRESSURE GAUGE: The air tank pressure gauge indicates the reserve air pressure in the air tank (s). OPTIONAL PRESSURE REGULATOR: The air pressure coming from the air tank is controlled by the regulator knob. Turn the pressure regulation knob clockwise to increase discharge pressure, and counterclockwise to decrease discharge pressure. OPTIONAL OUTLET PRESSURE GAUGE: The outlet pressure gauge indicates the air pressure available at the outlet side of the regulator. This pressure is controlled by the regulator and is always less or equal to the air tank pressure. AIR TANK DRAIN VALVE: The drain valve is used to remove moisture from the air tank(s) after the air compressor is shut off. NEVER attempt to open the drain valve when more than 10 PSI of air pressure is in the air tank! To open the drain valve, turn the knob counterclockwise. OIL FILL GASOLINE AIR COMPRESSOR FEATURES (TWO STAGE) AM2-PM09-08J_JC FEATURES 070610-CAW ITEM DESCRIPTION 1 PRESSURE REGULATOR 2 PRESSURE GAUGE - OUTLET PSI 3 PRESSURE RELIEF VALVE 4 TANK DRAIN VALVES 5 PRESSURE GAUGE - TANK PSI 6 DECAL - WARNING: HOT SURFACES 7 THROTTLE CONTROL 8 DECAL - WARNING: INJURY 9 PILOT VALVE 10 DECAL - CAUTION/WARNING/DANGER ITEM DESCRIPTION 11 PUMP OIL SIGHT GLASS 12 PUMP OIL DRAIN 13 ENGINE SWITCH 14 OIL FILL PORT 15 AIR COMPRESSOR PUMP 16 DECAL - WARNING: HOT 17 AIR FILTER 18 VENTILATION OPENINGS 19 BELTGUARD 20 ENGINE EXPLODED VIEW & EXPLANATION OF AIR COMPRESSOR FEATURES SAFETY RELIEF VALVE: This valve is designed to prevent system failures by relieving pressure from the system when the compressed air reaches a predetermined level. The valve is preset by the manufacturer and must not be modified in any way. To verify the valve is working properly, pull on the ring. Air pressure should escape. When the ring is released, it will reseat. PILOT VALVE: When the toggle is in the upright position, all air from the air compressor is vented through the ...

Herunterladen

Geben Sie zwei Ziffern: