Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Save this manual. Copyright© 1999 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353. Manual Revised 06d, 08j , 09d Page 2 SKU 39954 For technical questions, please call 1-800-444-3353. Specifications Battery Type Sealed, lead-acid, rechargeable, 17 Ah Power Output 12 VDC, 900 amps peak; 400 amps starting power Cables Rubber insulated (#4) copper; 400 amp clamps Compressor 260 PSI maximum pressure Output Socket 12 VDC Cigarette lighter output Features Overload protection• Automatic charge cutoff (at 14.5~15.5 volts) to help • prevent overcharging Inflating Needle and Air Raft Tips• Note: Performance of this unit may vary depending on variations in local line voltage. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this tool! Wear eye protection. 1. When working on or around lead-acid batteries, always wear ANSI-approved eye protection. Avoid contact with Battery Acid.2. If splashed, immediately wash effected area with clean water. Continue washing area until medical help arrives. Connect cables to proper polarities.3. Connect RED POSITIVE (+) cable to Positive Battery Terminal first. Connect BLACK NEGATIVE (-) cable to body ground (a non moving metal part) second. Do not connect the BLACK NEGATIVE (-) cable to the Negative Battery Terminal. Turn vehicle ignition off before making cable connections. Use this tool in well ventilated areas.4. Do not attempt to jump start vehicle around flammable gases or liquids. Do not allow the Black and Red clamps to touch.5. If this happens it can melt clamps or other metal objects. Place them only on the corresponding terminals. 12 Volt Systems Only. 6. Use only with vehicles and boats with 12 volt electrical systems. For emergency use only. 7. Do not use this system in the place of a vehicle battery. Only use to jump start your vehicle. Avoid working alone8. . If an accident happens, an assistant can bring help. REV 08b, 08k Avoid electrical shock. 9. Use extreme caution when clamping around uninsulated conductors or bus bars. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and cabinet enclosures when testing voltages. Keep work area clean10. . Cluttered areas invite injuries. Avoid damaging Jumpstarter System11. . Use only as specified in this manual. Observe work area conditions12. . Do not use tool in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Keep children away13. . Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords. Store idle equipment14. . When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. Do not place this unit15. in direct sunlight, direct heat or moisture. Dress properly16. . Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair. Use eye and ear protection17. . Always wear ANSI-approved impact safety goggles. Do not overreach18. . Keep proper footing and balance at all times. Do not reach over or across electrical cables or frames. Maintain tools with care19. . Inspect tool cords periodically and, if damaged, have them repaired by an authorized technician. Stay alert20. . Watch what you are doing, use common sense. Do not operate any tool when you are tired. Check for damaged parts21. . Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly. Replacement parts and accessories22. . When servicing, use only identical replacement parts. Use of any other parts will void the...
Dieses Handbuch ist für folgende Modelle:Pumps - 39954 (616.53 kb)