Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Canon Dateigröße: 6.64 mb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Canon  LV-7370

Enabl ng D rect Power ON [D rect power on (AC)] Turns the projector on automatically when AC power is supplied. This eliminates the need to always use the POWER button on the remote control or projector cabinet. Turn ng On the Projector By Apply ng Computer S gnal [D rect power on (Comp )] When the projector is in Standby mode, applying a computer signal from a computer connected to the ANALOG IN-1 input will power on the projector and simultaneously project the computer’s image. This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet to power on the projector. To use this function, first connect a computer to the projector and the projector to an active AC input. NOTE: • Disconnecting a computer signal from the computer will not power off the projector. We recommend using this function in combination of the Power management function. • This function will not be available under the following conditions: -when a component signal is applied to the ANALOG IN-1 connector -when a Sync on Green RGB signal or composite sync signal is applied -when [Power-saving] is selected for [Standby mode] • To enable the Direct power on (Comp 1) after turning off the projector, wait 3 minutes and input an analog RGB signal. If an analog RGB signal is still present when the projector is turned off, the Direct power on (Comp 1) will not work and the projector remains in standby mode. Enabl ng Power Management [Power management] When this option is selected you can enable the projector to automatically turn off (at the selected time: 5 min., 10 min., 20 min., 30 min.) if there is no operation with no signal received by any input. Select ng Default Source [Default source select] You can set the projector to default to any one of its inputs each time the projector is turned on. Last ....................... Sets the projector to default to the previous or last active input each time the projector is turned on. Auto....................... Searches for an active source in order of Computer 1 > Computer 2 (Digital) > Computer 2 (Analog) > VIDEO > S-VIDEO > Computer 1 and displays the first found source. Computer 1 ........... Displays the RGB source from the Computer 1 Input [ANALOG IN-1] connector every time the projector is started up. Computer 2 (Digital) ... Displays the DVI digital source from the Computer 2 Input [DIGITAL IN/ANALOG IN-2] (Digital) connector every time the projector is started up. Computer 2 (Analog) .. Displays the RGB analog source from the Computer 2 Input [DIGITAL IN/ANALOG IN-2] (Analog) connector every time the projector is started up. VIDEO.................... Displays the Video source from the VIDEO IN connector every time the projector is started up. S-VIDEO ................ Displays the Video source from the S-VIDEO IN connector every time the projector is started up. 6 . Us ng On-Screen Menu . Menu Descriptions & Functions [Information] Displays the status of the lamp / filter, the current signal, the wired LAN, and the version. This item has four pages. The information included is as follows: NOTE: Pressing the INFO button on the remote control will show the [Information] menu items. [Usage time] [Remaining lamp time] (%) [Lamp counter] (H) [Filter counter] (H) Rema n ng Lamp T me/Lamp Counter The projector has the Quiet mode. The lamp life varies depending on two modes: quiet mode and normal mode. The [Remaining lamp time] shows the percentage of remaining bulb life. The [Lamp counter] shows the amount of lamp usage (hours). • When the remaining lamp time reaches 0%, the “Replace with the new lamp.” message will be displayed. Replace with the new lamp. See page 69 for lamp replacement. • The message for lamp replacement will be displayed under the following conditions: - one minute after the projector has been powered on. - when the POWER button on the projector cabinet or on the remote control is pressed. To cancel the message, press any button on the projector cabinet or the remote control. • When the remaining lamp time reaches 0%, the Remaining lamp time bar indicator changes from 0% to 100(H) in red and starts counting down. When the remaining lamp time reaches 0 hours, the projector will not turn on. Lamp l fe(H) Replacement lamp Normal Qu et 3000 4000 LV-LP31 6 . Us ng On-Screen Menu [Input signal] [Source index] [Horizontal frequency] [Vertical frequency] [Input signal type] [Video type] [Sync type] [Sync polarity] [Scan type] [Wired LAN] [Projector name] [MAC address] [Version] [Model] [Serial number] [Firmware version] [Data version] 6 . Us ng On-Screen Menu . Menu Descriptions & Functions [Reset] Resett ng sett ngs and adjustments [Reset] The Reset feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: Clear ng adjustments and sett ngs for the current s gnal [Current s gnal] Resets the adjustments for the current signal to the factory preset levels. The items that c...

Herunterladen

Geben Sie zwei Ziffern: