Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Damaged or entangled cords increase the risk of electric shock. If operating a tool in a damp locae. tion is unavoidable, use a Ground Fault Circuit Interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock. Do not use an extension cord with f. this product. Personal safety3. Stay alert, watch what you are doa. ing and use common sense when operating this tool. Do not use this tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating tools may result in serious personal injury. Use personal protective equipb. ment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Prevent unintentional starting. c. Ensure the switch is in the off-position before connecting to power source or moving the tool. Do not overreach. Keep proper d. footing and balance at all times. This enables better control of the tool in unexpected situations. Dress properly. Do not wear loose e. clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Only use safety equipment that f. has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area. Tool use and care4. Do not force the tool. Use the a. correct tool for your application. The correct tool will do the job better and safer at the rate for which it was designed. Do not use the tool if the switch b. does not turn it on and off. Any tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the c. power source of the tool before making any adjustments, changing accessories, or storing tools. Such preventive safety measures reduce the risk of starting the tool accidentally. Store idle tools out of the reach of d. children and do not allow persons unfamiliar with the tool or these instructions to operate it. Tools are dangerous in the hands of untrained users. Maintain tools. Check for mise. alignment or binding of moving parts, breakage of parts and any other condition that may affect the tool’s operation. If damaged, have the tool repaired before use. Many accidents are caused by poorly maintained tools. Use the tool in accordance with f. these instructions, taking into account the working conditions and the work to be performed. Use of the tool for operations different from those intended could result in a hazardous situation. Service5. Have your tool serviced by a qualia. fied repair person using only identical replacement parts. This will ensure that the safety of the tool is maintained. Air Compressor Safety Warnings Risk of fire or explosion - do not 1. spray flammable liquid in a confined area or towards a hot surface. Spray area must be well-ventilated. Do not smoke while spraying or spray where spark or flame is present. Arcing parts - keep compressor at least 20 feet away from explosive vapors, such as when spraying with a spray gun. Risk of bursting - do not adjust 2. regulator to result in output pressure greater than marked maximum pressure of attachment. Risk of injury - do not direct air 3. stream at body. To reduce the risk of electric shock, do not expose to rain. Store indoors. Do not use to supply breathing air.4. Do not direct air flow from the Com5. pressor at people or animals. Industrial applications must follow 6. OSHA requirements. Maintain labels and nameplates on 7. the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Avoid unintentional starting. Prepare 8. to begin work before turning on the tool. Do not leave the tool unattended 9. when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving. This product is not a toy. Keep it out 10. of reach of children. WARNING: The brass components 11. of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq.) People with pacemakers should 12. consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should: • Avoid operating alone. • Do not use with power switch locked on. • Properly maintain and inspect to avoid electrical shock. • Any power cord must be properly grounded. Ground Fault Circuit Inter rupter (GFCI) should also be implemented – it prevents sustained electrical shock. Some dust created by power sand13. ing, sawing, grinding, drilling, and other construction activities, contains chemicals kn...