Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Dimplex Dateigröße: 1.25 mb Dateiname: si5-14me_fd8705_gb-2007-05-29.pdf Unterrichtssprache:

packing kg 109 111 118 122 130 5 Electrical Connection 5.1 Nominal voltage; fuse protection V / A 230/ 16 230 / 16 230 / 20 230 / 25 230 / 32 5.2 Nominal power consumption 1 B0 W35 kW 1.26 1.30 1.68 1.70 2.30 2.35 2.75 2.77 3.70 3.76 5.3 Starting current with soft starter A 24 26 38 38 50 5.4 Nominal current B0 W35 / cos cp A / --- 6.8 / 0.8 7.1 / 0.8 9.1 / 0.8 9.3 / 0.8 12.6 / 0.8 12.9 / 0.8 15.0 / 0.8 15.3 / 0.8 19.7 / 0.8 20.0 / 0.8 6 Complies with the European safety regulations 3 3 3 3 3 7 Additional model features 7.1 Water in device protected against freezing 4 No No No No No 7.2 Performance levels 1 1 1 1 1 7.3 Controller internal/external Internal Internal Internal Internal Internal 1. This data indicates the size and capacity of the system. For an analysis of the economic and energy efficiency of the system, both the bivalence point and the regulation should also be taken into consideration. The specified values, e.g. B10 / W55, have the following meaning: Heat source temperature 10 °C and heating water flow temperature 55 °C. 2. Note that additional space is required for pipe connections, operation and maintenance. 3. See CE declaration of conformity 4. The heat circulating pump and the heat pump controller must always be ready for operation. E-8 Anhang / Appendix / Annexes 1 Maßbilder / Dimension Drawings / Schémas cotés...................................................................A-II 1.1 Maßbild/ Dimension Drawing/ Schéma coté.........................................................................................A-II 2 Diagramme / Diagrams / Diagrammes.......................................................................................A-III 2.1 Kennlinien / Characteristic Curves / Courbes caractéristiques SI 5ME.................................................A-III 2.2 Kennlinien / Characteristic Curves / Courbes caractéristiques SI 7ME.................................................A-IV 2.3 Kennlinien / Characteristic Curves / Courbes caractéristiques SI 9ME..................................................A-V 2.4 Kennlinien / Characteristic Curves / Courbes caractéristiques SI 11ME...............................................A-VI 2.5 Kennlinien / Characteristic Curves / Courbes caractéristiques SI 14ME..............................................A-VII 3 Stromlaufpläne / Circuit Diagrams / Schémas électriques....................................................A-VIII 3.1 Steuerung / Control / Commande........................................................................................................A-VIII 3.2 Last / Load / Charge..............................................................................................................................A-IX 3.3 Klemmenanschlussplan / Terminal Connection Plan / Schéma de connexion des bornes....................A-X 3.4 Legende / Legend / Légende.................................................................................................................A-XI 4 Hydraulisches Prinzipschema / Hydraulic Plumbing Diagram / Schéma hydraulique........A-XII 4.1 Darstellung / Schematic View / Représentation....................................................................................A-XII 4.2 Legende / Legend / Légende...............................................................................................................A-XIII 5 Konformitätserklärung / Declaration of Conformity / Déclaration de conformité...............A-XIV A-I Anhang ■ Appendix ■ Annexes Anhang ■ Appendix ■ Annexes 1 1 Maßbilder / Dimension Drawings / Schémas cotés 1.1 Maßbild / Dimension Drawing / Schéma coté l~T ca. / approx. / env. 20 ZLZL ( 1 : 20 ) Zuführung Elektroleitungen Supply cables Amenée lignes électriques Wärmequelle Eingang in WP 1 1/4” Außengewinde Heat source Heat pump inlet 1 1/4” external thread Source de chaleur Entrée dans la PAC Filetage extérieur 1 1/4” Wärmequelle Ausgang aus WP 1 1/4” Außengewinde Heat source Heat pump outlet 1 1/4” external thread Source de chaleur Sortie de la PAC Filetage extérieur 1 1/4” Heizungsvorlauf Ausgang aus WP 1 1/4” Außengewinde Heating water flow Heat pump outlet 1 1/4” external thread Aller eau de chauffage Sortie de la PAC Filetage extérieur 1 1/4” Heizungsrücklauf Eingang in WP 1 1/4” Außengewinde Heating water return flow Heat pump inlet 1 1/4” external thread Retfeur eau de chauffage Entrée dans la PAC Filetage extérieur 1 1/4” A-II 2.1 2 Diagramme / Diagrams / Diagrammes 2.1 Kennlinien / Characteristic Curves / Courbes caractéristiques SI 5ME Heizleistung in [kW] Wasseraustrittstemperatur in [0C] Heating capacity in [kW] Water outlet temperature in [0C] -10 -5 0 5 10 15 20 25 30 Soleeintrittstemperatur in [0C] ■ Brine inlet temperature in [0C] ■ Température d'entrée d'eau glycolée en [0C] Leistungsaufnahme (incl. Pumpenleistungsanteil) Power consumption (...

Herunterladen

Geben Sie zwei Ziffern: