if more you need to use a Flash Buffer™ to increase the signal. If you connect more than 30 Flash Tubes in any single line use a Flash Buffer™ to boost signal. At the end of each line connect a Flash-Term™. If you don’t use one not all of the patterns will work and there will be no flashing during that program. Plug Flash-Matrix™ and any Flash Buffer™ that are used into power. Refer to Operating instructions for use. Model: Flash Matrix Hub™ SPECIFICATIONS: Power: 110V/60Hz Weight: 8 lbs.

Size: 19” x 3.5” x 5” Fuse: 15A SET UP: Link the Flash Tubes to the Flash-2C™ by inserting tube connectors into controller sockets on the back of unit. The maximum length to first Flash Tube™ is 10 ft, any more and you will have to use a Flash Buffer. If you connect more than 30 Flash Tubes in any single line use a Flash Buffer™ to boost signal. At the end of each line connect a Flash-Term™. If you don’t use one the Flash Tubes will work but not properly. Plug Flash-2C™ and any Flash Buffer™

Please read the following instructions before installing or LBirg your rew/urit. Operating Instructions: The FS-6C™ by American DJ® is a black, metal color changing adapter that mounts on the front of the American DJ® FS-600/A™ Pro Folowspot. Features 4 color wands, enabling the operator to use one or all wands to blend color on the spot. Use American DJ® color gel sheets (not included with FS-6C, sold seperately). The FS-6C™ conveniently mounts in the gel frame bracket on the front of the FS-

For your convenience the BU-200 has been tested and is ready to be used, there is no assembly required. Please read the following instructions before installing or using your new Bubble Machine. Operating Instructions: Unit is ready to be set on flat surface. Pour standard bubble liquid or American DJ™ Bubble Juice, specially formulated for use with the BU-200, into front reservoir of unit, Plug unit into power. The BU-200 will immediately begin to produce bubbles. We suggest placing the unit

on,10 min. off Colors: Multiple Colored Lenses HALOGEN LAMP WARNING! This fixture is fitted with halogen lamps which are highly susceptible to damage if improperly handled. Never touch lamp with bare fingers as the oil from your hands will shorten lamp life. Also, never move fixture until lamp has had ample time to cool. Remember, lamps are not covered under warranty conditions. Congratulations and thank you for purchasing the Lotus™ by American DJ®. For your convenience the Lotus™ has been

Never touch lamp ¡with bare fingers as the oil from your lhands will shorten lamp life. Also, never Jmove fixture until lamp has had ample ¡time to cool. Remember, lamps are not icovered under warranty conditions. C a ut i o n ! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses. Mxei: Chameleon SPECIFICATIONS: TM Lamp: ZB-EFP 12V 100W Power: 110V/60Hz Optics: High Quality Glass Lens Ventilation: Conventional Wor

Never touch lamp with ■ bare fingers as the oil from your j hands will shorten lamp life. Also, | never move fixture until lamp I has had ample time to cool. j Rem em b e r, lamps are not cov- | ered under warranty conditions. i Thank you for purchasing the Color gemi™ by American DJ®. For your convenience the Color gemi™ has teen lamped and is testify to be there is m assembly required. Please read the fdlcMMng instructions before installing or LBirgycLr newColor gpmi™. Operating Instruction

For your convenience this product has been tested and is ready to be used, there is no assembly required. Please read the following instructions before installing or using your new unit. Product Description: The BPP-20™ is a 4 channel, 10A per channel power pack with a total capacity of 20 amps. Each channel features two 120V, 3-prong A/C sockets on the rear of the unit, individual fuse for each channel, and green LED lights indicating channels in use. The BPP-20™has two 8 pin din connectors l