Anleitung The Singing Machine, modell KARAOKE STVG-502
Hersteller: The Singing Machine Dateigröße: 654.85 kb Dateiname: 3203035_PM_EN.pdf
Unterrichtssprache:
|
|
|
|
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Anleitung Zusammenfassung
In most homes, the TV has either a cable connected or antennae in use. Once you connect your Singing Machine to the TV/VCR, you must 'tell' your TV/VCR to display the input from the Singing Machine instead of the usual input from the cable or antennae. Check your TV/VCR user manual for the easiest way to setup your particular entertainment system. If you don't have your manual you can always call your TV/VCR manufacturer for that information or try hitting their website for online assistance. We've listed below the most common ways of setting up a TV/VCR: (1) In the setup menu for configuring the TV/VCR there may be an option on 'Input Selection' where you may choose between 'Cable/Ant.', 'Video 1', or 'Video 2' etc. as the input source. (2) Try looking for a 'Video' channel between the highest channel and the lowest channel on your TV or VCR. (i.e. Between 99 and 2 may be 'VIDEO' or 'INPUT' or 'GAME') (3) Look for a button on the remote control for the TV/VCR you are connecting to that says 'VIDEO', 'VIDEO 1', 'Game', 'AUX', 'EXT', 'LINE1', 'LINE-IN' or occasionally the 'VCR' button will display the Video input source. ENGLISH E8 MAKING THE CONNECTIONS ENGLISH CONNECTING A VIDEO COMPONENT FOR INPUT Please follow the steps below to display CDG lyrics on the Singing Machine’s monitor from another video source: (1) Locate the multicolored patch cords. (2) Connect video cable (yellow) to the Video In of the back of the Singing Machine. (3) Connect the other end of the Video Cable (yellow) to the Video Output on another video source such as a VCR. (4) Set the FUNCTION SELECT switch to AUX and the MONITOR ON/OFF switch to ON. (5) Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of the Singing Machine to have the best picture quality. REAR VIEW OF SINGING MACHINE REAR VIEW OF VCR R L VIDEO INPUT (Yellow Jack) VIDEO OUTPUT (Yellow Jack) R L OUT IN AUXVIDEO IN OUT AUDIO CONNECTION Connect the STVG-502 to your TV or home stereo system using the White and Red connections on the supplied patch cord. Plug the white end of the patch cord into the white AUX OUT jack on the STVG-502. Plug the red end of the patch cord into the red AUX OUT jack on STVG-502. Now connect the other end of the cable’s white (left channel) and red (right channel) plugs to your TV or home stereo system’s ‘AUDIO IN’ or ‘AUX IN’ jacks. VIDEO OUT AUDIO OUT REAR VIEW OF SINGING MACHINE REAR VIEW OF TV L AUX OUT IN L R VIDEO INPUT AUDIO INPUT R L L AUX OUTPUT AUX OUTPUT AUDIO INPUT AUDIO INPUT RR (White Jack) (Red Jack) (Red Jack) (White Jack) E9 MAKING THE CONNECTIONS CONNECTING AN AUDIO COMPONENT FOR INPUT To connect another audio source (such as a Tuner, an AV Receiver or a VCR) so you can sing along with its music, simply connect the Audio Output jacks (Red & White RCA jacks) to the Singing Machine’s AUX IN L & R jacks. REAR VIEW OF ANOTHER SINGING MACHINE AUDIO COMPONENT AUX OUT IN L R AUX INPUT L (White Jack) AUDIO OUTPUT L (White Jack) AUDIO OUTPUT R (Red Jack) AUX INPUT R (Red Jack) VIDEO AUDIO OUT OUT L R ENGLISH E10 CD OR CD+G OPERATION . Warning - Tapping or dropping the microphone while it is on can permanently damage your microphone. Resist the urge to swing the microphone around by the cord! PREPARATION ENGLISH . This unit is designed to play CD’s bearing the identification logo " ". If CD’s do not conform to the CD standard, they may not play properly. . Fingerprints and dust should be carefully wiped off with a soft cloth. Wipe in a straight motion from the center of the disc to the outside edge. . Never use chemicals, such as record cleaning sprays, antistatic sprays or fluids, benzene or thinner to clean compact discs. These chemicals will permanently damage the plastic surface of the disc. . Always place the compact disc on the disc tray with the label facing upward. Compact discs can be played on only one side. . To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. . Discs should be returned to their cases after use to protect them from dust and scratches. . To prevent warping the disc, do not expose it to direct sunlight, high humidity or high temperatures for extended periods of time. . Do not apply paper or write anything on either side of the disc. The inks used in some felt-tips pens may damage the surfaces of the disc. PLAYING CD OR CD+G DISC Reminders: . Adjust MASTER VOLUME control on your unit, TV or audio system to a comfortable level. . Adjust MIC/ECHO/BALANCE controls as needed to achieve the desired mix of music and vocals through your TV or sound system. . Do not press the disc cover of the CD compartment while it’s playing. . Never place anything except a compact disc on the disc tray. Foreign objects can damage the unit. . Do not apply excessive force to disc cover. . Only place one disc on the disc tray at a time. TURNING POWER ON/OFF . To turn on the Karaoke center, press the ON/OFF button, the ON/OFF LED will ...