Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Musikinstrumente - SU700 (7.1 mb)
Musikinstrumente - SU700 (31.42 mb)
Anleitung Zusammenfassung
This causes the SU700 to execute its power-on sequence. • The SU700 begins by displaying its name. • It then checks for options and indicates any options that it finds. • It then checks the amount of installed RAM, and indicates the results. • It then checks whether a floppy disk with a valid volume has been inserted in the disk slot. If so, it indicates that it has found the volume, and then proceeds to load the volume. • The SU700 enters PLAY STANDBY mode, with SONG 01 selected. 1 CHAPTER Chapter 1 SU700 Components, Connections, and Startup 33 Chapter 1 SU700 Components, Connections, and Startup 34 Chapter 1 SU700 Components, Connections, and Startup Chapter 2 Tutorial This chapter takes you through a tutorial that will give you some quick hands-on experience with the SU700. The first part of the tutorial how to play the demo song and how to use various features. The second part of the tutorial takes you through the procedures for recording samples and building a song. CONTENTS 2.1 Setting Up 36 2.2 Listening to the Demo Song 37 2.3 Building Your Own Song 47 2.4 Modifying sampled sounds 95 Chapter 2 Tutorial 35 CHAPTER 2 Chapter 2 Tutorial 2.1 Setting Up First you will need to connect your audio system so that you can listen to the demo song and monitor the process of creating a song. You will also need to connect a CD player so that you can playback the sampling sources from the included audio CD. Connections Before you make connections, be sure that the power of the SU700, your CD player, and your audio system is turned off. 1. Connect the analog outputs from your CD player to the ANALOG INPUT jacks on the rear of the SU700. . The ANALOG INPUT (L, R) jacks are each monaural phone jacks. In order to connect them to your CD player, you will need to obtain connecting cables that are appropriate for each type of jack. 2. Connect powered speakers or another monitoring device to the STEREO OUT (L/MONO, R) jacks. . If you are using a monaural audio system, make connections to the L/MONO jack. R L/MONO STEREO OUT R L ANALOG INPUT AC INLET OUT IN MIDI POWER ON/ OFF ATTENTION :RISQUE DE CHOC ELECTRIQUE ME PAS OUVRIR. RISK OF ERECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF FIRE OR ERECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION STEREO OUT ANALOG INPUT CD player Audio system for monitoring (amplified speakers, etc.) If you are using headphones, connect them to the PHONES jack located on the front panel of the SU700. . The PHONES jack can be used simultaneously with the STEREO OUT jacks. 36 Chapter 2 Tutorial Headphones PHONES Headphones PHONES Turn the MASTER VOLUME of the SU700 and the volume controls of your CD player and audio system all the way down to 0. Turn down to 0 Do not turn on the power yet. We still need to prepare the SU700 to auto-load the demo song when its power is turned on. 2.2 Listening to the Demo Song This section shows you how to load and play the demo song included in the accessory floppy disk. Loading the Demo Song (auto-load) In order to playback the demo song from the included the following diagram, the contents of the floppy disk must be loaded into the internal memory of the SU700. If you insert the included floppy disk into the disk drive and turn on the power, the SU700 will automatically load the demo song. CAUTION If you load the demo song after using the SU700, all data currently in internal memory will be lost. If memory contains any data you wish to keep, be sure to save it to disk etc. (Save: ® p.287) before you load the demo song. 2 CHAPTER Chapter 2 Tutorial 37 1. Insert the accessory floppy into the slot on the SU700 front panel. . Insert with label facing up and shutter facing the front panel. Push in lightly until the disk clicks into place. 2. Switch on the power to the SU700. 3. The SU700 begins automatic loading of the song data. While data is being loaded, the display will indicate “LOADING …” . Do not eject the floppy disk or switch off the SU700 power while the word LOADING... is on the display, as doing so may cause damage to the disk or the disk drive. 4. When loading is finished, the screen will look like this. * “SU_DEMO” Composer: Takashi MORIO (synthesizer artist) * This demo-FD features samples from the world’s foremost sample developer AMG. Chapter 2 Tutorial 38 Chapter 2 Tutorial Playing the Demo Playing the Demo You’re now ready to play the song. l Press the sequencer start button ( ) to begin playback of the song. l Adjust the volume by turning the MASTER VOLUME knob. l You can stop playback by pressing the stop button ( ). l You can jump back to the top of the song by pressing . Use this knob to adjust the volume. l Reading the display Track bank Song number Song name Song location (beat:measure) Track data BPM (tempo) Track Bank Indicates the currently selected bank. Song number Indicates the song number of the currently selected song. (The SU700 stores up to 20 songs, each identified by a number.) Song name Name of the cur...