Login:
Stimmen - 0, Durchschnittliche Bewertung: 5 ( )

Anleitung Yamaha, modell MG124CX

Hersteller: Yamaha
Dateigröße: 1.42 mb
Dateiname:
Unterrichtssprache:enes
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Dieses Gerät hat auch andere Anweisungen:

Anleitung Zusammenfassung


LOW: 100 Hz (shelving) PEAK Indicator Red LED turns on when post EQ signal (either post MIC HA or post EQ signal for CHs 5/6, 7/8) reaches –3 dB below clipping (+17 dBu). Internal Digital Effect* 16 PROGRAM, PARAMETER control Foot Switch (Digital Effect On/Off) LED Level Meter Pre MONITOR Level 2x12 points LED meter (PEAK, +10, +6, +3, 0, –3, –6, –10, –15, –20, –25, –30 dB) PEAK lights if the signal level reaches 3 dB below the clipping level. Power Supply Adaptor PA-20 AC 35 VCT, 0.94 A, Cable Length = 3.6 m Power Consumption 30 W Dimensions (W x H x D) 346.2 mm x 86.1 mm x 436.6 mm Net Weight 3.2 kg (MG124CX), 3 kg (MG124C) All faders are nominal if not specified. Output impedance of signal generator: 150 ohms * The MG124CX feature is described first, followed by the MG124C feature in brackets: MG124CX (MG124C) MG124CX/MG124C Owner’s Manual 67 Specifications Reference Specifications Reference Input Specifications Input Connectors Gain Input Impedance Appropriate Impedance Sensitivity * Nominal Level Max. before Clipping Connector Specifications CH INPUT MIC (CHs 1-4) –60 dB 3k. 50–600. Mics –80 dBu (0.078 mV) –60 dBu (0.775 mV) –40 dBu (7.75 mV) XLR-3-31 type (balanced [1 = GND, 2 = HOT, 3 = COLD]) –16 dB –36 dBu (12.3 mV) –16 dBu (123 mV) +4 dBu (1.23 V) CH INPUT LINE (CHs 1-4) –34 dB 10k. 600. Lines –54 dBu (1.55 mV) –34 dBu (15.5 mV) –14 dBu (155 mV) TRS phone jack (balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) +10 dB –10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) ST CH MIC INPUT (CHs 5/6, 7/8) –60 dB 3k. 50–600. Mics –80 dBu (0.078 mV) –60 dBu (0.775 mV) –40 dBu (7.75 mV) XLR-3-31 type (balanced [1 = GND, 2 = HOT, 3 = COLD]) –16 dB –36 dBu (12.3 mV) –16 dBu (123 mV) –6 dBu (389 mV) ST CH LINE INPUT (CHs 5/6, 7/8) –34 dB 10k. 600. Lines –54 dBu (1.55 mV) –34 dBu (15.5 mV) –14 dBu (155 mV) Phone jack (unbalanced)+10 dB –10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) ST CH INPUT (CHs 9/10, 11/12) — 10k. 600. Lines –30 dBu (24.5 mV) –10 dBu (245 mV) +10 dBu (2.45 V) Phone jack (unbalanced) RCA pin jack CH INSERT IN (CHs 1-4) — 10k. 600. Lines –20 dBu (77.5 mV) 0 dBu (0.775 V) +20 dBu (7.75 V) TRS phone Jack (unbalanced [Tip = Out, Ring = In, Sleeve = GND]) RETURN (L, R) — 10k. 600. Lines –12 dBu (195 mV) +4 dBu (1.23 V) +24 dBu (12.3 V) Phone jack (unbalanced) 2TR IN (L, R) — 10k. 600. Lines –26 dBV (50.1 mV) –10dBV (0.316V) +10dBV (3.16 V) RCA pin jack Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms * Sensitivity : The lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to the maximum level. (All faders and level controls are at their maximum position.) ¦ Output Specifications Output Connectors Output Impedance Appropriate Impedance Nominal Level Max. before clipping Connector Specifications STEREO OUT (L, R) 75. 600. Lines +4dBu (1.23 V) +24 dBu (12.3 V) XLR-3-32 type (balanced [1 = GND, 2 = HOT, 3 = COLD]) Phone Jack (balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) GROUP OUT (1, 2) 150. 10k. Lines +4dBu (1.23 V) +20 dBu (7.75 V) Phone jack (impedance balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) EFFECT/AUX (AUX1, 2*) SEND 150. 10k. Lines +4dBu (1.23 V) +20 dBu (7.75 V) Phone jack (impedance balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) CH INSERT OUT (CHs 1-4) 75. 10k. Lines 0 dBu (0.775 V) +20 dBu (7.75 V) Phone jack (unbalanced [Tip = Out, Ring = In, Sleeve = GND]) REC OUT (L, R) 600. 10k. Lines –10 dBV (0.316 V) +10 dBV (3.16 V) RCA pin jack MONITOR OUT (L, R) 150. 10k. Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone jack (impedance balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) PHONES OUT 100. 40. Phones 3 mW 75 mW Stereo phone jack Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms * The MG124CX feature is described first, followed by the MG124C feature in brackets: MG124CX (MG124C) 68 MG124CX/MG124C Owner’s Manual Specifications Reference Specifications Reference Dimensional Diagrams 346.2 436.6 86.1 79.6 2 433.9 Unit: mm MG124CX/MG124C Owner’s Manual 69 Specifications Reference ¦ Block Diagram and Level Diagram HAHA HPF COMP 3-Stage EQ BABA SUMSUM BA HA BABA HPF HA HA 3-Stage EQ3-Stage EQ2-Stage EQ HAINV 2-Stage EQ INVINVINV SUMSUM SUMSUM SUMSUM SUMSUMBABABABA DRDR INVINV INV INV BABA BABA MODELMG124CXMG124C AUXAUX1 EFFECTAUX2 FUNCTION NAME CH Fader [0dBu] [0dBu] [0dBu] [0dBu] [0dBu][0dBu][0dBu] [–6dBu][–6dBu] [0dBu] [–6dBu] [0dBu] [0dBu] [0dBu] TO ST [–10dBu] [–16dBu] [0dBu] [–10dBu]STEREO Fader STEREO/GROUP LED METERLED METERMONITOR/PHONES GROUP Fader[0dBu][–6dBu][–6dBu][0dBu] [0dBu][0dBu] [0dBu][0dBu] PREPREPRE PFL +15VPANBAL/PANBAL G1-2ST ST PFL +15V+15V PFL +15V PFL ON YE 2TR IN AUXPARAMETER PROGRAM(1-16) EFFECT RETURN DIGITALEFFECT(DSP) only MG124CX FOOT SWEFFECT ON/OFFCH IN LINE Gain:Min [+10dBu]CH IN MIC Gain:Min [–16dBu] Clip Level Clip LevelCH LevelST CH Level[Nominal:–10dB] RETURN2TR IN[Nominal:–6dB] GROUP Fader[Nominal:–10dB]MONITOR MIX *1GROUP OUT [+4dBu] STEREO OUT [+4dBu] STEREO Master[Nominal:–10dB] MONITOR/PHONES[Nominal...

Dieses Handbuch ist für folgende Modelle:
Musikinstrumente - MG124C (1.42 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien