Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Parameter “AUDIO DELAY” Adjustable range (Default setting: “AUTO”) “AUTO”, 0 to 240 ms (You can adjust the delay time by the 10 ms.) * “AUTO”: If you operate HDMI connection to a TV with the function to automatically adjusting the audio delay, you can adjust the delay time automatically. Note The system memorizes the settings assigned to each input source. Setting the audio output You can select this system (or a TV connected to this system via the HDMI OUT jack of this system) for reproducing sound signals input from the HDMI IN jack in the setup menu. Parameter “HDMI AUDIO” Adjustable option (Default setting: “AMP”) “AMP”: Outputs HDMI sound signals from the speakers connected to this system. “TV”: Outputs HDMI sound signals from the speakers of a TV connected to this system. Sound output from the speakers connected to this system is muted. Notes • The volume level will not change from pressing VOLUME +/– or MUTE while output from the TV. • You cannot change the audio output when “HDMI CONTROL” is set to “ON”. Switching on/off the HDMI™ control function You can set whether to use the HDMI control function. Refer to P.21 for HDMI control function. Parameter “HDMI CONTROL” Adjustable option (Default setting: “OFF”) “ON”: Activates the HDMI control function. “OFF”: Deactivates the HDMI control function. USEFULOPERATION 19 En Setup menu Setup menu Changing the brightness of the front panel display You can change the brightness of the front panel display. You can also turn off the front panel display to view a movie in a darker environment. The brightness of the front panel changes as follows. Parameter “DISPLAY MODE” Adjustable range (Default setting: “DIMMER 0”) Bright Dark * Selecting DISPLAY OFF turns off the front panel display after exiting the setup menu. Notes • The front panel display lights up momentarily when any operation is performed with DISPLAY OFF mode selected. • Only the STATUS indicator remains lit in DISPLAY OFF mode. Changing the setting of the speaker type You can set the speaker type if you want to add or change speakers. When you connect only the supplied speaker, you do not have to change the setting. Parameter “SP TYPE” Adjustable range (Default setting: “2CH”) “BAR”: When you connect a speaker with integrated front left/right/center channels (such as a bar-type speaker). “2CH”: When you connect front left/right (2-channel) speakers. “3CH”: When you connect front left/right (2-channel) speakers and a center speaker. Notes • To activate “SP TYPE”, set the system to standby mode and turn on again after setting the speaker type. • “SP DISTANCE” is displayed when “2CH” or “3CH” is selected. Setting the distance between the speakers Select a parameter suited for the distance between the front left and right speakers, to obtain the most suitable surround effect. Parameter “SP DISTANCE” Adjustable range (Default setting: “NORMAL”) “WIDE”: When the distance between the front speakers is over 150 cm (59-1/16”). “NORMAL”: When the distance between the front speakers is from 80 cm (31-1/2”) to 150 cm (59-1/ 16”). “NARROW”: When the distance between the front speakers is within 80 cm (31-1/2”). Note When the surround mode is off, this function is invalid. 20 En Setup menu Setup menu Using the HDMI™ control function You can operate the following functions of this system with the remote control of your TV when the TV (HDMI control function supported) is connected to the HDMI OUT jack of this system. • Turning this system on or to standby mode (conjunction with TV) • Adjusting the volume • Selecting a device to reproduce TV sounds (this unit or TV) y • Even if your TV supports the HDMI control function, some functions may not be available. For details, refer to the instruction manual supplied with your TV. • If you connect this system and Blu-ray disc player or DVD player (HDMI control function supported) to HDMI, you can also control those devices with the HDMI control function. For details, refer to the instruction manual supplied with each device. • We suggest that you use products (TV, Blu-ray disc/DVD player, etc.) from the same manufacturer. • The HDMI control-compatible components include Panasonic VIERA Link compatible TV, DVD player/ recorder and Blu-ray disc player. • When “HDMI CONTROL” is set to “ON”, operations of the TV (for example, changing channels, etc.) may change the system settings, such as the surround mode. (Steps 1 through 3 are required for the HDMI control function setup.) 1 Turn on all devices connected to this system with HDMI. 2 Enable the HDMI control function on each device. For this system, set “HDMI CONTROL” to “ON” (. P. 19). For external devices, refer to the instruction manual supplied with each device. 3 Turn off the TV, and then turn it on again. (Step 4 through 6 are required for making the TV learn linked devices. If the connections or devices are switched, you need to carry out these steps again.) 4 Select this system as the input source of the TV. 5 Turn on ...