Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Fotos und technische Daten Yamaha YSP-2200 |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
¦ Prepare the remote control Install batteries in the remote control. Operation range YSP-2200 (YSP-CU2200 + NS-SWP600) Quick Reference Guide English UCTABGLV Necessary items for this manual Supplied items Optional items *This guide explains how to connect TV and Blu-ray disc player with HDMI input/output jacks. Refer to Safety and Accessory Information about other supplied accessories. ..TV ..Blu-ray disc player ..HDMI cable (.2) .. Center unit and Subwoofer (.1) .. Remote control (.1) ..Cardboard microphone stand (.1) .. IntelliBeam microphone (.1) ..IR Flasher (.1) ..Stands for subwoofer (.4) ..Speaker cable (.1) ..Non-skid pad for the center unit (.4) ..Battery (.2) (AA, R6, UM-3) ..Optical cable (.1) ..Video pin cable (.1) ..Demonstration DVD (.1) Press ... Battery . 2 (AA, R6, UM-3) Remove the transparent sheet before using the remote control. Within 6 m (20 ft) Installation Connection Settings Playback Install YSP-2200 . Install this unit in the exact center of the wall when it is measured from the left and right corners. . Install this unit as close to the exact front of your normal listening position as possible. Some of your TV have sensors such as motion sensor, or signal transmitter for 3D glasses in front. Installing the center unit may interrupts the sensors or signal transmitter functioning. Set the center unit away from your TV, or install it in your rack. Center unit ..Install this unit in the center of the left and right walls. ..Listening position (such as sofa, etc.) should be located at the front of the unit. ..The distance between listening position and the unit should be more than 1.8 m (5.9 ft). Subwoofer Install the subwoofer as close to the center unit as possible for a better unit of sounds. When the center unit straddles the stands of your TV Attach the stands to the subwoofer Install the subwoofer with the supplied stands. Horizontal placement is convenient for installing the center of a rack, and vertical placement is convenient for installing the side of a rack. When the center unit hides the remote control sensor of your TV Remove the center unit legs Use IR Flasher (supplied) The unit receives the signal from the remote control of your TV in front, and transmits to your TV by IR Flasher (supplied). Remove the backing paper on the tip of LED part of IR Flasher, and attach it to the remote control sensor of your TV or the area close to the remote control sensor of your TV on the rear panel of center unit as shown. Connect the plug to the IR output jack of the unit. ..When using IR Flasher, direct the remote control of your TV to the center unit. ..This function is valid even in the standby mode. ..This function may not activate with some TVs. Center unit Subwoofer The graduation (from 0 to 10) Adjustable range: 28.5 mm to 38.5 mm (1-1/8 in to 1-1/2 in) Turning the stands to left makes the unit higher. Confirm the graduation of each stand to make each stand the same height. Horizontal placement Vertical placement 3 Push the whole leg to the center of the bottom as shown in the illustration while laying the hook to the same direction and remove it. 2 Remove the outside part of the leg. 1 Turn the leg furthermore to the left. 4 Attach the 4 non-skid pads (supplied) to the corners on the bottom of the center unit. (The illustration below is one of the examples for attaching the non-skid pads.) Non-skid pad IR Flasher (supplied) Remote control sensor of your TV yHint Installation Connection Settings Playback Connect your TV and Blu-ray disc player . Do not connect the power cable until all connections are completed. . Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or terminal. For the cable connection, follow the orders below. Refer to Owner’s Manual on the page 15 when connecting your game console etc. Audio return channel (ARC) supported TV ..Connect HDMI cable to audio return channel supported terminal (the terminal with “ARC” indicated) on TV. In this case, you do not need to connect optical cable. ..Activate the HDMI control function of this unit so as to activate audio return channel (ARC). (See Owner’s Manual on the page 25.) What is audio return channel (ARC)? A function transmits digital audio signal output from TV to this unit through a HDMI cable. By this function, a digital audio pin cable to connect TV and this unit is not needed. 1. HDMI cable (optional) Input the digital audio/video signals of the Blu-ray disc player to this unit. 2. HDMI cable (optional) The digital video of the Bluray disc is reflected on TV. 3. Optical cable (supplied) Play back digital sounds of TV on this unit. y 4. Video pin cable (supplied) To display the YSP-2200’s setup menus on the TV. 1 2 3 INPUT1 HDMI INPUT OPTICAL OUTPUT VIDEO R AUDIO L HDMI OUTPUT Connect the center unit with the speaker cable (supplied) to the subwoofer. Match the positive (+) of the subwoofer terminal to the positive (+) of the center unit terminal, and the negative (-...