Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
This leaflet provides supplemental information for DTX500 version 1.10. To check the version number: Press the power switch while holding down the [SHIFT] button. DTX500 [I.]0] NOV-30-10 Version Number Trigger Setup List (page 12 of Owner's Manual) Trigger Setup parameters of the DTX500 version 1.10 are shown in Table 1 . For users of the DTX500 series Drum Set, set the Trigger Setup to “1: Medium” or “2: Dynamic’.’ In addition, you can set suitable pad types for your drum set as shown in Table 2. For details, see "Trigger Setup Edit" on page 34 of the Owner’s Manual. Table 1 No. Name 1 Medium DTX500 series Drum Sets 2 Dynamic 3 SP Med for DTXPRESS IV Special Drum Set 4 SP Dyna 5 STD Med for DTXPRESS IV Standard Drum Set 6 STD Dyna 7 DT 10/20 - 8 -11 UserTrg - Features Normal Setting Wide dynamic range. The setting is designed for maximum expressive control, allowing performance subtleties over a wide dynamic range. Excessive vibration however, may result in crosstalk (sound being produced by other pads). Refer to page 12 of the Owner’s Manual * In the default setting, "1: Medium" is selected. Table 2 Set Name DTX500K DTX520K DTX540K DTX550K Pad type for a snare pad SN-3 SN-4 SN-4 SN-1 Pad type for a tom pad TM-3 TM-3 TM-4 TM-3 DT Snare DT series drum trigger (for snare pad) DT HiTom DT series drum trigger (for small toms) DT LoTom DT series drum trigger (for large toms) DT Kick DT series drum trigger (for bass drum) misc 1-6 Other manufacturer’s pads 1 to 6 m.'i'nm ■ SN-1, 2, 3, 4, and 5 are used as snare pads. TM-1, 2, 3, 4, and 5 are used as tom pads. CY-1, 2, 3, 4, 5, and 6 are used as cymbal pads. HH-1 and 2 are used as hi-hat pads. Pad types (page 35 of Owner's Manual) Pad types of the DTX500 version 1.10 are defined as follows. KICK XP125W/125/80S/80/65/60 SN-1 XP120SD/120T/100SD/100T SN-2 TP120SD/100 SN-3 TP65S/65 SN-4 XP80/70 SN-5 XP120SD/120T/100SD/100T/80/70/TP65S/65 TM-1 XP120SD/120T/100SD/100T TM-2 TP120SD/100 TM-3 TP65S/65 TM-4 XP80/70 TM-5 XP80/70/TP65S/65 CY-1 PCY155/150S/135/100/65 * CY-2 PCY155/150S/135/100/65 * CY-3 PCY155/150S/135/100/65 * CY-4 PCY130SC CY-5 PCY130S/130 CY-6 PCY65S HH-1 RHH135/PCY100/TP65 HH-2 RHH130 * These pad types are different in the sensitivity settings among the three sections (the Bow, Edge, and Cup sections in a 3-zone cymbal pad). You can change these as desired. The "CY-1" setting features the same sensitivity settings for all three sections. In the "CY-2" setting, the sensitivity of the Edge section is fairly lower than that of the other sections. In the "CY-3" setting, the sensitivity of the Cup section is fairly lower than that of the other sections. U.R.G., Digital Musical Instruments Division © 2011 Yamaha Corpora...