Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
4) 2. Make the Settings for the Trigger Type and Trigger Parameters (PDX-8 Owner's Manual; p. 5) For the PDX-8 function correctly, the trigger type and trigger parameters in your percussion sound module (TD-3, TD-6, TD-12, TD-20, etc.) must be adjusted. 3. Adjust the "Rim Sens" (PDX-8 Owner's Manual; p. 5) If you find the following kinds of problems occurring, adjust the “Rim Sens” of the percussion sound module. If you hear a rim sound when you strike the head, decrease the "Rim Sens" value. If you cannot get a rim sound even when you strike the rim hard, increase the "Rim Sens" value. Example: Connect the PDX-8 to the SNARE input on the TD-3 Trigger Settings Trigger Parameter Display Value Trigger Type tHP 80r Mask Time H5H 8 Rim Sensitivity rf75 10 (7-12) How To Set the Trigger Parameters 1. Press [LEVEL/PAN] + [TEMPO] on the TD-3. [EDIT] flashes and " fc HP " appears in the display, then the trigger type value is indicated. 2. Strike the PDX-8. The SNARE trigger indicator lights. 3. Press [EDIT] to select the parameter (“ tHP ”, “ f!5t ”, “ rf!5 ”, etc.). 4. Press [+] or [-] to make the setting. 5. Press [DRUM KIT]; the [EDIT] light goes off. * Do not turn off the power without the [EDIT] light having gone out. Otherwise you will lose the change you have just made. TD-3 J 1PD Copyright © 2006 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. 40673856 PDX-8 LEAFLET Trigger Parameter 406...