Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
10 Controlling the RT-20 with an Expression Pedal...................................... 10 Names of Things and What They Do............... 11 Front Panel....................................................................................11 Mode List ........................................................................................................ 13 Rear Panel .................................................................................... 14 Troubleshooting ............................................. 15 Sample Settings ............................................. 16 Setting Memo.................................................17 Main Specifications ........................................ 18 3 Installing Batteries Batteries are supplied with the unit. The life of these batteries may be limited, however, since their primary purpose was to enable testing. Insert the included batteries as shown in figure, being careful to orient the batteries correctly. fig.010 • When turning the unit upside-down, get a bunch of newspapers or magazines, and place them under the four corners or at both ends to prevent damage to the buttons and controls. Also, you should try to orient the unit so no buttons or controls get damaged. • When turning the unit upside-down, handle with care to avoid dropping it, or allowing it to fall or tip over. • Make sure the “+” and “–” ends of the batteries are oriented correctly. • When the batteries run down, the POWER indicator gets dim. If this happens, replace with new batteries. • When replacing the batteries, use six AA type. • Avoid using new batteries together with used ones. In addition, avoid mixing different types of batteries. Doing so can result in fluid leakage. • Battery life can vary depending on battery type. Continuous usage time under battery power is about 10 hours with alkaline batteries and about 6 hours with carbon batteries. (This may vary according to usage conditions.) Making the Connections Making the Connections The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type. • Noise may be produced if wireless communications devices, such as cell phones, are operated in the vicinity of this unit. Such noise could occur when receiving or initiating a call, or while conversing. Should you experience such problems, you should relocate such wireless devices so they are at a greater distance from this unit, or switch them off. • Use a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions. • Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable....
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - RT-20 (1.59 mb)
Musikinstrumente - RT-20 (1.59 mb)