Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
DEPTH/TONE knob Adjusts the tone of the upper range. RESONANCE/E.LEVEL knob Adjusts the volume. Using the Effects DRIVE/SYNTH DRIVE / SYNTH indicator Pedal indicator DRIVE / SYNTH pedal This distorts the sound, or create an effect like that of an analog synth. DRIVE/SYNTH pedal The DRIVE/SYNTH is alternately switched on and off each time you press the pedal. The indicator lights up when the effect is on. TYPE knob NATURAL Overdrive that gives a more natural sounding distortion. BASS DRIVER Models the TECH21 SANSAMP BASS DRIVER DI. OVER DRIVE Models the BOSS ODB-3. DISTORTION Distortion tuned especially for use with basses. MUFF FUZZ Models the Electro-Harmonix Big Muff .. METAL Wild, radical distortion sound. HI-BAND DRIVE With this effect, distortion is applied only to the high- frequency sounds, and not to the sounds in the low- frequency range. SAW LEAD A saw-wave synth-bass sound with a slight filter motion. Using the effect in combination with the Expression (p. 18) type set to “RESONANCE” makes it even more effective. MILD FILTER A saw-wave synth-bass sound with relatively weak filter effect. A motion of the filter changes depending on the strength or the position, when playing the bass. DEEP FILTER A saw-wave synth-bass sound with a strong filter effect. A motion of the filter changes depending on the strength or the position, when playing the bass. SQUARE A square-wave synth-bass sound. A motion of the filter changes depending on the strength or the position, when playing the bass. * When SYNTH (SAW LEAD–SQUARE) is selected, this effect does not function correctly if two or more notes are played simultaneously. DRIVE/SENS knob When DRIVE (NATURAL–HI-BAND DRIVE) is selected Adjusts the amount of distortion applied. Turning the knob to the right boosts the distortion and increases the volume. When SYNTH (SAW LEAD–SQUARE) is selected Adjusts the amount of filtering applied. Using the Effects TONE/CUTOFF knob When (NATURAL–HI-BAND DRIVE) is selected Adjusts the tone. Turn the knob to the left for a milder sound or to the right for a sharper sound. When SYNTH (SAW LEAD–SQUARE) is selected Adjusts the frequency at which the harmonic components of the sound are cut (the cutoff frequency). D.LEVEL/RESONANCE knob When (NATURAL–HI-BAND DRIVE) is selected Adjusts the volume of the direct sound. * Normally this adjusts the sound immediately ahead of its being input to DRIVE/SYNTH, but when OCTAVE UP is selected as the FILTER/TONE type, this adjusts the sound input to the INPUT jack. Thus, only the sounds raised by an octave are distorted, giving an effect that sounds like a guitar playing in unison with the direct bass sound. When SYNTH (SAW LEAD–SQUARE) is selected Adjusts the amount by which the harmonic components near the cutoff frequency are boosted. E.LEVEL knob Adjusts the volume. * Noise may creep into the sound if the E.LEVEL knob is turned up too high. Adjust the E.LEVEL knob so the volume level sounds the same whether the effect is s...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - ME-50B (1.91 mb)
Musikinstrumente - ME-50B (1.91 mb)