Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Fotos und technische Daten Roland DP-90 |
Anleitung Zusammenfassung
2012 Version: 1.00 1. Receive Data ¦¦Channel Voice Messages .¦Note Off Status 2nd byte 3rd byte 8nH kkH vvH 9nH kkH 00H n = MIDI channel number: 0H–FH (ch.1–ch.16) kk = note number: 00H–7FH (0–127) vv = note off velocity: 00H–7FH (0–127) * For Drum Parts, these messages are received when Rx. NOTE OFF = ON for each Instrument. .¦Note On Status 2nd byte 3rd byte 9nH kkH vvH n = MIDI channel number: 0H–FH (ch.1–ch.16) kk = note number: 00H–7FH (0–127) vv = note on velocity: 01H–7FH (1–127) * Not received when Rx. NOTE MESSAGE = OFF. (Initial value is ON) * For Drum Parts, not received when Rx. NOTE ON = OFF for each Instrument. .¦Polyphonic Key Pressure Status 2nd byte 3rd byte AnH kkH vvH n = MIDI channel number: 0H–FH (ch.1–ch.16) kk = note number: 00H–7FH (0–127) vv = key pressure: 00H–7FH (0–127) * Not received when Rx. POLY PRESSURE (PAf ) = OFF. (Initial value is ON) * The resulting effect is determined by System Exclusive messages. With the initial settings, there will be no effect. .¦Control Change * When Rx. CONTROL CHANGE = OFF, all control change messages except for Channel Mode messages will be ignored. * The value specified by a Control Change message will not be reset even by a Program Change, etc. .¦Bank Select (Controller Number 0, 32) Status 2nd byte 3rd byte BnH 00H mmH BnH 20H llH n = MIDI channel number: 0H–FH (ch.1–ch.16) mm, ll = Bank number: 00H, 00H–7FH, 7FH (bank.1–bank.16384), Initial Value = 00 00H (bank.1) * Not received when Rx. BANK SELECT = OFF. * “Rx. BANK SELECT” is set to OFF by “GM1 System On,” and Bank Select message will be ignored. * “Rx. BANK SELECT” is set to ON by “GM2 System On.” * “Rx. BANK SELECT” is set to ON by power-on Reset or by receiving “GS RESET.” * When Rx. BANK SELECT LSB = OFF, Bank number LSB (llH) will be handled as 00H regardless of the received value. However, when sending Bank Select messages, you have to send both the MSB (mmH) and LSB (llH, the value should be 00H) together. * Bank Select processing will be suspended until a Program Change message is received. * The GS format “Variation number” is the value of the Bank Select MSB (Controller number 0) expressed in decimal. * Some other GS devices do not recognize the Bank Select LSB (Controller number 32). .¦Modulation (Controller Number 1) Status 2nd byte 3rd byte BnH 01H vvH n = MIDI channel number: 0H–FH (ch.1–ch.16) vv = Modulation depth: 00H–7FH (0–127) * Not received when Rx. MODULATION = OFF. (Initial value is ON) * The resulting effect is determined by System Exclusive messages. With the initial settings, this is Pitch Modulation Depth. .¦Portamento Time (Controller Number 5) Status 2nd byte 3rd byte BnH 05H vvH n = MIDI channel number: 0H–FH (ch.1–ch.16) vv = Portamento Time: 00H–7FH (0–127), Initial value = 00H (0) * This adjusts the rate of pitch change when Portamento is ON or when using the Portamento Control. A value of 0 results in the fastest change. .¦Data Entry (Controller Number 6, 38) Status 2nd byte 3rd byte BnH 06H mmH BnH 26H llH n = MIDI channel number: 0H–FH (ch.1–ch.16) mm, ll = the value of the parameter specified by RPN/NRPN mm = MSB, ll = LSB .¦Volume (Controller Number 7) Status 2nd byte 3rd byte BnH 07H vvH n = MIDI channel number: 0H–FH (ch.1–ch.16) vv = Volume: 00H–7FH (0–127), Initial Value = 64H (100) * Volume messages are used to adjust the volume balance of each Part. * Not received when Rx. VOLUME = OFF. (Initial value is ON) .¦Pan (Controller Number 10) Status 2nd byte 3rd byte BnH 0AH vvH n = MIDI channel number: 0H–FH (ch.1–ch.16) vv = pan: 00H–40H–7FH (Left–Center–Right), Initial Value = 40H (Center) * For Rhythm Parts, this is a relative adjustment of each Instrument’s pan setting. * Some Tones are not capable of being panned all the way to the left or right. * Not received when Rx. PANPOT = OFF. (Initial value is ON) .¦Expression (Controller Number 11) Status 2nd byte 3rd byte BnH 0BH vvH n = MIDI channel number: 0H–FH (ch.1–ch.16) vv = Expression: 00H–7FH (0–127), Initial Value = 7FH (127) * This adjusts the volume of a Part. It can be used independently from Volume messages. Expression messages are used for musical expression within a performance; e.g., expression pedal movements, crescendo and decrescendo. * Not received when Rx. EXPRESSION = OFF. (Initial value is ON) Copyright © 2012 ROLAND CORPORATION 1PS All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. 1 MIDI Implementation MIDI Implementation Status 2nd byte 3rd byte BnH 40H vvH n = MIDI channel number: 0H–FH (ch.1–ch.16) vv = Control value: 00H–7FH (0–127) * Not received when Rx. HOLD1 = OFF. (Initial value is ON) .¦Portamento (Controller Number 65) Status 2nd byte 3rd byte BnH 41H vvH n = MIDI channel number: 0H–FH (ch.1–ch.16) vv = Control value : 00H–7FH (0–127) 0–63 = OFF, 64–127 = ON * Not received when Rx. PORTAMENTO = OFF. (Initial value is ON) .¦Sostenuto (Controller Number 66) Status 2nd byte 3rd byte BnH ...