Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Battery electrolyte is hazardous to your eyes; if any electrolyte gets into your eyes, flush them immediately with water. • Do not carry or store batteries together with metallic objects such as pens, necklaces, or hairpins. 4 Playing your guitar Turning the power on/off 1. 2. 3. Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. Make sure that the power to all equipment is turned off. Connect your external equipment. Set each of the AC-33's [VOLUME] knobs and the [MASTER] knob to 0. 4. Switch on the power to any external equipment connected to the AUX IN jacks. 5. Switch on the AC-33's power. I IVIHIMIBIEICE] MASTER PHONES JIQQ|J§J|Q Av v....., ° CHORUS O AC-33 POWER :zrm ' K 6. Switch on any equipment connected to the LINE OUT jack. To turn the power off, reverse these steps. To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally. Always make sure to have the volume level turned down before switching on power. Even with the volume all the way down, you may still hear some sound when the power is switched on, but this is normal, and does not indicate a malfunction. If you're operating the AC-33 only on batteries, the POWER indicator will become dim as the batteries run low. When the batteries run even lower, the POWER indicator will blink. Replace the batteries as soon as possible. Connect your guitar, and switch on the AC-33's power. Connect your guitar to the INPUT jack of the GUITAR CHANNEL. Any guitar that has a pickup can be connected. If your guitar has a pickup as well as a built-in preamp, you can also connect it to the MIC/LINE CHANNEL. 2. Set the [VOLUME] knob of the input you're using to the 5 position (center). A CHORUS («IG»} 0 AC-33 VOLUME BASS TREBLE CHORUS Adjusting the tone Use the [BASS] (low range), [MIDDLE] (mid range), and [TREBLE] (high range) knobs of the desired channel to adjust the tone. 3. While producing sound, use the [MASTER] knob to adjust the volume. « ■o « 5 Outputting sound from your microphone Outputting sound from a CD player 1. Connect your microphone, and switch on the AC-33's power. Connect your microphone to the INPUT jack of the MIC/LINE CHANNEL. You can use any one of three types of plugs (XLR, TRS, phone). You cannot use more than one microphone simultaneously (the TRS/ phone jack will take priority). 2. Set the [VOLUME] knob of the MIC/LINE CHANNEL to the MIC position. IMlimiElffl MASTER PHONES ÆvÆ tlc**us / AC-33 m1 I I I I M POWER M ■ f 3. While producing sound, use the [MASTER] knob to adjust the volume. IIVH ...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - Acoustic Chorus AC-33 (15.79 mb)