Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: JVC Dateigröße: 5.03 mb Dateiname: Unterrichtssprache:

To configure the power-save timeout: 3 2 1 1. Press MENU. 2. Press the PERS Wipe Pattern button. 3. Press the right knob to set the switcher power-save behavior. You can choose from the following: • PwrSve — All buttons and the menu display turn off. The switcher conserves as much power as possible without affecting on-air video. • Sleep — The menu display turns off. Buttons light and slowly fade in a raindrop pattern. 4. Use the right knob to set the power-save timeout (in minutes). You can select a value from 0 (off) to 999 minutes. Transition Rate Units You can select the units used to specify durations for various switcher transitions. Choose the units that you are most comfortable working with. To select the units for switcher transitions: 3 2 1 1. Press MENU. 2. Press the PERS Wipe Pattern button. 3. Use the Rate knob to select the units used to specify switcher transition rates. You can choose from the following: • Frames — Switcher transitions are specified in frames. • Secnds — Switcher transitions are specified in seconds. Double-Press Rate You can set the double-press rate of the switcher to suit your preference. Setting a fast rate requires you to double-press the knobs in quick succession in order to be recognized as a double press. Setting a slow rate allows more time between presses but may register two single presses as a double press. Find a value that is most comfortable for your operating style. To set the switcher double press rate: 3 4 2 1 1. Press MENU. 2. Press the PERS Wipe Pattern button. 3. Press the DblPrs Speed knob. 4. Double-press the middle knob at a rate you feel comfortable. This defines the double press rate. 5. Press MENU to save the setting. Resource Sharing The switcher can only use one Chroma Key at a time. You can specify how the Chroma Key is shared between the keys on your switcher. To specify Chroma Key resource sharing: 3 2 1 1. Press MENU. 2. Press the SYSTEM Wipe Pattern button. 3. Press the Rsrc Mode knob to display the Resource Mode menu. 4. Use the ChrKey knob to select how the Chroma Key resource is shared between keys. You can choose from the following: • KEY1 — The Chroma Key is locked to Key 1. Only Key 1 can display a Chroma Key. • KEY2 — The Chroma Key is locked to Key 2. Only Key 2 can display a Chroma Key. • KEY3 (KM-H3000 only) — The Chroma Key is locked to Key 3. Only Key 3 can display a Chroma Key. • FLOAT — The Chroma Key can be used by any key. If a Chroma Key is on-air and you attempt to create a second Chroma Key, you are asked if you wish to take the first Chroma Key off-air and use the Chroma Key resource for the new key. • ASK — The Chroma Key can be used by any key. If a Chroma Key is in-use (on or off-air), you are asked if you wish to convert the original Chroma Key to an Auto-Select key, take it off-air, and use the Chroma Key resource for the new key. 5. Press the ChrKey knob to select the Chroma Key sharing mode. 6. Press the Confrm knob to commit the change. Press the Cancel knob to cancel the change. For More Information on... • creating and using Chroma Keys, refer to the section “Chroma Key” on page 20. Switch on Field or Frame The Switch On feature allows you to select when the switcher triggers a transition from one video source to the next when you are running in an interlaced video format. Each interlaced video frame is composed of an odd field and an even field and you can specify that transitions are initiated on: • even fields only • odd fields only • either even or odd fields If you are running in a progressive scan video format, setting your switcher to transition on even or odd fields will cause the switcher to only allow transitions on every second frame. To set when the switcher initiates transitions: 4 2 3 1 1. Press MENU. 2. Press the PERS Wipe Pattern button. 3. Press NEXT until FldSwt (FrmSwt if you are using a progressive scan video format) is displayed. 4. Use the FldSwt (FrmSwt if you are using a progressive scan video format) knob to select when transitions are initiated. You can choose from the following: • F1 — Field 1 (Odd Field) transitions are initiated after the odd field of the source video is drawn. • F2 — Field 2 (Even Field) transitions are initiated after the even field of the source video is drawn. • BOTH — Transitions can be initiated on either even or odd fields or frames. 5. Press the FldSwt (FrmSwt if you are using a progressive scan video format) knob to commit the selection. Editor Control Your switcher can be controlled by external editors using the GVG100 protocol. You can enable or disable external control. To enable or disable external editor control: 4 2 3 1 1. Press MENU. 2. Press the PERS Wipe Pattern button. 3. Press NEXT until Editor is displayed. 4. Use the Editor knob to enable or disable external editor control. You can choose from the following: • GVG100 — Editor control is enabled. • G100L — Legacy editor control is enabled. • Off — Editor control is disabled. For More Information ...

Herunterladen

Geben Sie zwei Ziffern: