Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Ampeg Dateigröße: 289.55 kb Dateiname: Unterrichtssprache:

Note: In this mode, if you press the Program Up (Value) switch, the current parameter value will be displayed. If you press the Program Down (Type/Param) switch, it will display to the currently selected FX type/parameter. S SSa aav vvi iin nng gg a aa P PPr rro oog ggr rra aam mm You’ve tweaked and turned some knobs, and you like the changes that you’ve made – now to save your program: 1. Set the Function Knob to the “WRITE” position, and press WRITE (“UP”) Button. A User program number will blink in the Program/Value Display. 2. Use the Program Up and Down Switches or Value Knob to select the destination program number (1 - 40) 3. Press the WRITE (“UP”) Button once again, and your program will be stored in the specified location (“CP” will display briefly indicating the process is complete). A AAm mmp pp/ //L LLi iin nne ee S SSe eet ttt tti iin nng gg ( ((A AAX XX5 55G GG o oon nnl lly yy) )) The AX5G’s output may be optimized to suit specific monitoring sources via the Amp/Line setting. Amp/Line settings can be made under the P5 parameter of the Drive/Amp (Note; the amp line setting is only applicable to Amp models {i.e. A0, A1, A2, A3, etc.} and will not be found on Drive models {i.e. D0, D1, D2, D3, etc.}). Select “A1” if you connect the AX5’s output to the input of a clean-sounding open back combo. Select “A2” if you connect the AX5’s output to the input of an open back combo with stronger mid-range content. Select “A3” if you connect the AX5’s output into a sealed back cabinet such as an amp stack. Select “Ln” if you connect the AX5’s output into a line input such as a mixer, recorder, headphones or any other full range monitoring source. 3 AX5-Series EasyStart Q QQu uui iic cck kk A AAs sss ssi iig ggn nn - --A AAs sss ssi iig ggn nni iin nng gg a aa s ssp ppe eec cci iif ffi iic cc e eef fff ffe eec cct tt p ppa aar rra aam mme eet tte eer rr t tto oo t tth hhe ee E EEx xxp ppr rre ees sss ssi iio oon nn P PPe eed dda aal ll The AX5’s expression pedal can be set to control volume, wah, and many effects parameter like the speed of the tremolo or depth of a reverb. Assigning an effect parameter to the expression pedal using the quick assign feature is easy: 1. First choose an effect type by turning the Function Selector to the appropriate effect section. Let’s choose Delay/REV. 2. Use the Write (“UP”) & Cancel (“DOWN”) Buttons to select an effect. In this case, let’s go with F4 (PP delay). 3. Turn the Function Knob clockwise one position to PARAM. Use the Write (“UP”) & Cancel (“DOWN”) Buttons to select “P2” (Feedback). Note: You should notice that the Program Down Switch led is blinking. This is the indication that you can assign this particular parameter (Feedback) to the expression pedal. You can’t use the expression pedal to control a parameter for which the Program Up or Program Down switches do not blink. 4. Hold down the Assign button for about 1 second. The display will read “CP”. You have now successfully assigned the Feedback of...

Herunterladen

Geben Sie zwei Ziffern: