Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Crate Amplifiers Dateigröße: 1.62 mb Dateiname: Unterrichtssprache:

(Note the optional use of a graphic equalizer in-line with the connections between the mixer and the power amplifier as shown below.) Controlling The Mixer’s Output Levels: • Monitors: Use the Aux 1 master slider (#30, page 6) to set the level of the output signal for the monitors. • Mains (House Speakers): Use the Mix master slider (#32, page 6) to set the level of the output signal for the house speakers. NOTE: The Mix output is a combination of the left and right channels. Therefore, the Left and Right master sliders (#31, page 6) must be set so a signal of sufficient strength is available for the Mix master slider. Use the LED Output Meters (#21, page 5) to visually monitor the output signal levels of the left and right channels. Please note that the sample connections shown in the Applications sections are only guidelines. They are intended to provide a starting point from which you may assemble a system that will best suit your particular needs. Also note that the models referenced for additional equipment are only suggestions. Your Crate Pro Audio dealer can assist you in selecting the components best suited for your sound system. CSM8/12/16/24 Console Mixer 10 CSM8/12/16/24 Console Mixer STEREO POWER AMP (SPA1400, etc.) HOUSE SPEAKERS (PS115HD, PS215HDT, etc.) DUAL GRAPHIC EQ (LS3231, LS2215) CSM8/12/16/24 CH.1 INPUT CH.2 INPUT CH.1 OUTPUT CH.2 OUTPUT CH.1 OUTPUT CH.2 OUTPUT CH.1 INPUT L R (PAN FULL (PANS AS NEEDED) LEFT) (PAN FULL RIGHT) CH.2 INPUT MONITOR SPEAKERS (M112HD, M115HD, etc.) LEFT BAL. OUT RIGHT BAL. OUT AUX1 SEND AUX2 SEND CH.1 OUTPUT CH.2 OUTPUT STEREO POWER AMP (SPA1400, etc.) DUAL GRAPHIC EQ (LS3231, LS2215) CH.1 INPUT CH.2 INPUT CH.1 OUTPUT CH.2 OUTPUT CH.1 INPUT CH.2 INPUT A B D C Applications: Basic Stereo Operation: This setup shows one way of using the mixer and two stereo power amplifiers to run the system. By using both Aux 1 and 2 for monitor sends, a separate monitor mix can be had for each of two sets of monitor speakers. Connect the components as follows: (A) Connect a balanced or unbalanced signal cable between the mixer’s Left Balanced Output and the house power amplifier’s Channel 1 Input. Connect the Right Balanced Output and the Channel 2 input in the same manner. (B) Connect a speaker cable between the house power amplifier’s Channel 1 Outputs and the left house speakers’ Inputs. Connect the Channel 2 Outputs to the right house speaker in the same manner. (C) Connect an unbalanced signal cable between the mixer’s Aux 1 Send and the monitor power amplifier’s Channel 1 Input. Connect the Aux 2 Send to the Channel 2 input in the same manner. (D) Connect a speaker cable between the monitor power amplifier’s Channel 1 Outputs and one set of monitor speakers’ Inputs. Connect the Channel 2 Outputs to the other set of monitors in the same manner. (Note the optional use of graphic equalizers in-line with the connections between the mixer and the power amp...

Herunterladen

Geben Sie zwei Ziffern: