Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
13. [REVERB] control This control enables you to adjust the reverb effect. Turn the knob clockwise for more reverb. 14. [CHORUS] switch This switch turns the chorus effect on and off. When the switch is turned on, the indicator above the switch lights up. 15. [MASTER] volume control This control enables you to adjust the overall volume level of the Normal and Tube Pre channels. NOTE:The [MASTER] volume control does not affect the signal level at the [DI OUT], [TUNER OUT], [AUX IN] or [LINE IN] connectors. 16. 16. Set this switch to On to mute the sound output from the amplifier. NOTE:This switch does not mute the sound output from the [DI OUT] or [TUNER OUT] connectors. HINT: Connect an optional VFS2 dual foot switch to the amplifier to control All Mute on and off with your foot. 17. [ANTI-FEEDBACK] control This control enables you to reduce the amount of feedback that is caused when the output from the amplifier is picked up via a guitar or microphone. Set the control knob so that the amount of feedback will be minimum. Turning the control knob clockwise will move the cut point to a higher frequency range. Turning the control knob counter-clockwise all the way will turn off the anti-feedback effect. Turn this control off if you hear no feedback. 18. [POWER] indicator The indicator lights up when the power to the unit is turned on. The [POWER] switch is located on the rear panel. Rear Panel Rear Panel 1 2 345 67 1. [POWER] switch When you turn this power switch on, the [POWER] indicator on the front panel will light up. 2. AC power connector Connect the supplied power cord here. 3. [FOOT SW] connector Connect an optional VFS2 dual foot switch here. For information on using the foot switch, please refer to “Controlling the Amplifier with VFS2 Dual Foot Switch” on page 12. 4. [DI OUT] connector Connect a PA device to this balanced XLR output connector to output the direct sound of a musical instrument connected to the AGA70/150. NOTE:The Direct Out signal is not affected by either the [ALL MUTE] switch or the [MASTER] volume control. HINT: The [DI OUT] connector is positioned just before the [VOLUME] control in the signal flow. Therefore, it will output a signal that has not passed through the tube, tone control, reverb and chorus effects, or anti-feedback control. (Please refer to the block diagram on page 13.) 5. [TUNER OUT] connector Connect a tuner here. HINT: Since the [ALL MUTE] switch does not affect the signal at this connector, you can tune the instrument without outputting sound from the amplifier. 6. [LINE IN] connector Connect a keyboard or MTR to this unbalanced standard phone jack. NOTE:The AGA70/150 features a monaural output. When a stereo signal is input to the [LINE IN] connector, it will be converted to monaural inside the amplifier. 7. [AUX IN] connector Connect a CD or MP3 player to this stereo mini jack. NOTE:The AGA70/150 features a monaural output. When a stereo signal is input to the [LINE IN] connector, it will be converted to monaural inside the amplifier. Controlling the Amplifier with VFS2 Dual Foot Switch Controlling the Amplifier with VFS2 Dual Foot Switch Switching Effect Bypass on and off (Switch 1) When you bypass the effects via the VFS2 Switch 1, all effects will be bypassed, regardless of the [REVERB] control and [CHORUS] switch settings. To cancel Effect Bypass, press the Switch 1 again or press the [CHORUS] switch on the front panel. When the effects are bypassed, the indicator above the [CHORUS] switch on the front panel will light up. Switching All Mute on and off (Switch 2) The VFS2 Switch 2 works in the same way as the [ALL MUTE] switch on the front panel (see “[ALL MUTE] switch” on page 9). Pressing the Switch 2 will switch All Mute on or off. Block Diagram Specifications I/Os: (NORMAL CH) GUITAR, MIC (TUBE PRE CH) GUITAR, MIC (Common) AUX IN, LINE IN, DI OUT, TUNER OUT, FOOT SW Phantom Power: +15V Effects: REVERB, CHORUS Output Power: AGA70; 70 watts RMS into 8 ohms AGA150; 150 watts RMS into 4 ohms Speaker: AGA70; VOX original (6.5 inch 8 ohm) full-range speaker x1 AGA150; VOX original (6.5 inch 4 ohm) woofer x1 VOX original (1 inch 4 ohm) dome tweeter x1 Power Source: AC, local voltage Power Consumption: AGA70; 73W AGA150; 48W Dimensions (W x D x H): AGA70; 323 x 262 x 331mm / 12.72 x 10.31 x 13.03inches AGA150; 373 x 362 x 331mm / 14.68 x 14.25 x 13.03inches Weight: AGA70; 10.1kg / 22.3lbs AGA150; 12.2kg / 26.9lbs Accessory: Power cord Optional Item: VFS2 Dual foot switch, VST-01 Speaker stand (AGA150 only) * Do not use any other speaker stand. * Before using the VST-01 Speaker Stand, be sure to read "Using the Speaker Stand." * Specifications and appearance are subject to change without notice for improvement. IMPOR T ANT NO TICE TO CONSUMERS This product has been manuf actured according to str ict specifications and v oltage requirements that are applicab le in the country in which it is intended thathis product used. If y ou ha ve purchased this product via t...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - AGA70 (291.66 kb)