Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
. FM antenna Find a location and an orientation that provide good reception, and then set up the antenna. Keep the antennas away from the speaker cords and the power cord to avoid picking up noise. . Power Connect the power cord to a wall outlet. The demonstration appears in the display. When you press ... ., the system turns on and the demonstration automatically ends. If the plug does not fit the wall outlet, detach the supplied plug adaptor (only for models equipped with an adaptor). . DAB antenna (CMT-MX550i only) With a DAB external antenna (not supplied), you can obtain higher DAB/DAB+ broadcast sound quality. We recommend that you use the supplied FM/DAB lead antenna only temporarily until you install a DAB external antenna. . Speakers Connect the speaker cords to the SPEAKERS jacks on the unit. Except for North American model, connect the other end of the speaker cords to the terminals on the speakers as shown below. Insert only the stripped portion of the speaker cords. Red (.) Notes on playing multisession discs . If the first session on the disc is a CD-DA session, the other sessions on the disc cannot be recognized regardless of the session format; only CD-DA tracks in the first session can be played back. . If the session format for the first session is CD-ROM and the following sessions are recorded in the same format, the system will continue to play back MP3 files accordingly in multiple sessions until the system encounters another session recorded in a different format. Listening to the radio Note that the reception of RDS services is only available for European model, and the DAB/DAB+ tuning is only available for CMT-MX550i. 1 Select “DAB” or “FM.” Press FUNCTION +/. . repeatedly. 2 Perform tuning. For automatic scanning Press TUNING MODE . repeatedly until “AUTO” appears, and then press +/. .. Scanning stops automatically when a station is tuned in, and “TUNED” and “STEREO” (for stereo programs only) light up in the display. If “TUNED” does not light up and the scanning for an FM station does not stop, press . . to stop scanning, then perform manual tuning (below). When you tune in a DAB/DAB+ station or an FM station that provides RDS services, the service name or station name appears on the display. For manual tuning (FM band only) Press TUNING MODE . repeatedly until “AUTO” and “PRESET” disappear, and then press +/. . repeatedly to tune in the desired station. Notes on DAB/DAB+ stations . When tuning in a DAB/DAB+ station, it may take a few seconds before you hear any sound. . Primary service is automatically received when secondary service ends. . This tuner does not support data services. Tip To reduce static noise on a weak FM stereo station, press FM MODE . repeatedly until “MONO” appears to turn off stereo reception. Running the DAB Automatic Scan manually 1 Press FUNCTION +/. . repeatedly to select “DAB.” 2 Press TOOL MENU . to start the DAB Automatic Scan. “Init Scan?” and “Push ENTER” appear. 3 Press . to perform scanning. Scanning begins. The scanning progress is indicated by advancing squares ( ). Depending on the DAB/DAB+ services available in your area, scanning may take a few minutes. When scanning is complete, a list of available services is created. Notes . If your country or region does not support DAB/DAB+ broadcast, “No Service” appears. . This procedure clears all previously stored presets. . Before unplugging the DAB/FM antenna, make sure the system is turned off to preserve your own DAB/DAB+ settings. Presetting radio stations 1 Tune in the desired station. 2 Press TUNER MEMORY . to select the tuner memory mode. 3 Press +/. . repeatedly to select the desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new station. 4 Press . to store the station. 5 Repeat steps 1 through 4 to store other stations. You can preset up to 20 DAB/DAB+ and 20 FM stations. 6 To call up a preset radio station, press TUNING MODE . repeatedly until “PRESET” appears, and then press +/. . repeatedly to select the desired preset number. Note on presetting DAB/DAB+ stations You can preset a DAB/DAB+ service only when it can be received. Playing a CD/MP3 disc 1 Select the CD function. Press FUNCTION +/. . repeatedly. 2 Place a disc. Press . (open) . on the unit, and place a disc with the label side up on the disc tray .. To close the disc tray, press . . on the unit. 3 Start playback. Press . (play) .. Other operations To Press Pause playback . (pause) .. To resume play, press the button again. Stop playback . (stop) .. Select a folder on an MP3 disc (select folder) +/. . repeatedly. Select a track or file . (go back)/. (go forward) .. Find a point in a track or file Hold down . (rewind)/. (fast forward) . during playback, and release the button at the desired point. Select Repeat Play REPEAT . repeatedly until “REP” or “REP1” appears. To change the play mode Press PLAY MODE . repeatedly while the player is stopped. You can sele...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - CMT-MX500I (862.71 kb)